CCT 22um Φ10mm L500mm Custom coating rod

CCT CCT 22um φ 10mm L500mm production wire-wound drawdown Bar Total length 50cm surface Eletroplating

CCT-22 L500mm-10mm production wire-wound drawdown Bar wet film thickness 22μm, Total length 50cm, effective application width 500mm, main rod diameter 10mm, surface process chrome plating, production process extrusion process, material stainless steel.

Brand

SKU: NB031327

CCT

Model

22um Φ10mm L500mm

Service

CCT shop

Information

Datasheet

What else did others buy

Genuinegoods

CCT 22um Φ10mm L500mm Custom coating rodOverview
Specifications
Comments
FAQs

22um Φ10mm L500mm

Custom coating rod

Introduction

CCT-22 L500mm Φ10mm custom wire rod is a production type wire rod, which is mainly used for quantitative control of fluid in the production process, and for uneven pre-coating, this defect can be solved through this production type metering rod. The production profile has a fixed groove that wipes out excess fluid, resulting in a flat coating.

CCT-22 L500mm Φ10mmThe customized wire rod is an extruded process metering rod with a coating film thickness of 22 microns, a Total length of 50cm, and a diameter of 10mm.

Production of metering rod specifications

The specification length can be customized, please consult for detailsNorth and South Tide customer service

Cicietide 22um Φ10mm L500mm Custom Coating Rod Detail Figure 1

How to use:

Cicietide 22um Φ10mm L500mm Custom Coating Rod Detail Figure 2

When applying liquid to the surface of the substrate, use a metering rod to adjust (scrape off) the amount of liquid.

Application

Coating rods for extrusion production are widely used in the following industries:

Membrane:Liquid crystal film, X-ray film, packaging film, etc

Glass:Automotive glass, liquid crystal glass, architectural glass, etc

Paper:Newspapers, light paper, wallpapers, special papers, etc

Packing Material:Cartons, tapes, wrapping paper, etc

Tape:videotapes, etc

Magnetic card:Tickets, recharge cards, etc

CCT 22um Φ10mm L500mm Custom coating rodSpecifications

LIST	VALUE
WFT	22μm
Total length	500mm
Effective application width	500mm
Main rod diameter	10mm
Surface process	chrome plating
Production process	Extrusion process
material	stainless steel

CCT 22um Φ10mm L500mm Custom coating rod Packing list

Wire rod X1, Transparent Encasement hose X1

[Note] Because the manufacturer's packaging may be updated or upgraded, the detailed packaging list shall be subject to the latest standard configuration of the manufacturer.

FAQ

[Q]

Is the price listed on the website the final cost for overseas purchases?

[A]

No, it isn't. This is the ex-factory price of the product in the Chinese Mainland. In addition to this price, buyers from different countries need to account for additional costs such as shipping fees, tariffs, and others. For specific regional quotes, please consult our customer service or fill out a quotation form.

[Q]

What is the specific process for purchasing the product?

[A]

First, please click on the quotation form on the website and fill in detailed information. Our customer service personnel will then send you a quotation based on your specific country and region, confirming payment and delivery methods. Following this, we proceed with contract signing, payment, and shipment. You can then await delivery.

[Q]

What should I do if the instrument I purchase needs repair?

[A]

After-sales repair for overseas instruments is an unavoidable issue. Our repair terms stipulate that the sender is responsible for the shipping and insurance costs incurred for the repair. Repairs within the warranty period are free, while repair costs beyond the warranty period are determined based on the actual situation.

+CCT 22um Φ10mm L500mm Custom coating rod Big data

+CCT 22um Φ10mm L500mm Custom coating rodKnowledge

+Navigation