CHINA ASR-5622B62 2-station electric dyeing fastness testing machine
CHINA 2-station electric dyeing fastness testing machine ASR-5622B62 is tied to the surface of the friction hammer with drying or wet white cotton cloth, the friction speed is 30cpm, and the friction hammer load is 200g.
AISRY
Introduction
Tie a dry or moist white cotton cloth on the surface of the friction hammer of the machine, and rub the colored test piece with a certain load and timesFinally, the staining friction fastness grade is evaluated according to the gray mark, which can also be used as a friction test for organic solvents.
According to the standard: JIS-L801, 0823, 0849, 1006, 1084, K6328, K8236
Applications
It is suitable for evaluating the friction fastness grade of dyeing for textiles, leather and other products, and can also be used as a friction test for organic fluxes.
Meets standards
JIS-L0801，0823，0849，1006，1084，K6328，P8236.
AISRY Specifications
| LIST | VALUE |
|---|---|
| Friction velocity | 30CPM |
| Friction hammer load | 200g |
| Auxiliary load | 300g |
| Friction hammer size | 45x50mm |
| Specimen size | 22x3cm |
| White cotton friction area | 5*5cm |
| Machine Weight | About 60kg |
| White cotton friction area | About 1cm2 |
| friction distance | 100mm |
| Counter | Electronic 6-digit number |
| number of friction groups | 6set |
| Power Supply | AC 220V50Hz |
| Machine size | 约(50x55x35)cm |
| motor | 1/4HP |
AISRY Packing list
machine X1, manual X1, certificate X1, warranty card X1
[Note] Because the manufacturer's packaging may be updated or upgraded, the detailed packaging list shall be subject to the latest standard configuration of the manufacturer.
FAQ
- Large Industrial Universal Testing Machine Selection: Range, Stability and Durability Considerations
- Small Laboratory Universal Testing Machine Selection: Cost-effective Model Recommendation
- Temperature, Humidity and other environmental factors affect the long-term stability of Universal Testing Machine
- How tensile testing devices perform field validation of load sensors (using standard weights)
- Solution of extensometer calibrating and signal drift
- Common Fault Phenomena and Diagnostic Steps of UTM Load Sensor
- Universal Testing Machine Daily Maintenance Checklist (weekly, monthly, annual)
- Universal Testing Machine Fixture type: Wedge, thread, plate, wire fixture, etc
- Difficulty Analysis of Composite Interlayer Tensile Test Standard
- Adhesive lap shear strength standard test method and key points analysis