CHINA ASR-XJJ-11B Digital Display Cantilever Impact Tester
Impact speed of 3.5m/s, pendulum pre-lift angle of 150 °, semi-automatic control, blade angle of 75 °, the distance from the center of the pendulum axis to the center of the sample 327mm.
AISRY
ASR-XJJ-11B
-
CHINA ZY-SJ-12 High Concentration Hydraulic Pulper
$ 3802.00 -
DZ-DSC300C Differential Scanning Calorimeter -40 ℃~ 600 ℃
Login -
YINUO YN-ZZ01 laboratory high Voltage digester 0.85MPa 175 degrees
$ 4711.00 -
CHINA NBC-5625 wire swing testing machine, cable repeated bending Detector
$ 759.00 -
SuJie FKC-I planktonic bacteria sampling capacity 100~6000L
$ 1600.00
Introduction
Liquid crystal digital display cantilever beam impact testing machine is an instrument for testing the impact resistance of non-metallic materials such as hard plastics, nylon, hard rubber, and electrical insulation materials under dynamic loads. It is required by non-metallic material manufacturers and quality inspection departments. Testing instruments are also indispensable testing instruments for scientific research units to conduct research on new materials.
XBL series digital cantilever beam impact testing machine can print out the test results and other functions.
1. This machine adopts semi-automatic control, which is easy to operate and high in work efficiency.
2. The special LCD equipped with this machine can display instant information.
3. Printable output.
Standards
I SO180-2000 "Plastics - Determination of Izod Impact Strength of Hard Materials"
GB/T1843—2008 "Rigid Plastic Izod Impact Test Method"
JB/T8761—1998 "Plastic Izod Impact Testing Machine"
ASTM D256-2010 "Test method for determining the impact strength of plastic IZOD pendulum"
AISRY ASR-XJJ-11B Digital Impact TesterSpecifications
| LIST | VALUE |
|---|---|
| Impact velocity | 3.5m/s |
| The distance from the center of the pendulum axis to the center of the specimen | 327mm |
| blade angle | 75° |
| Blade fillet radius | 0.8mm |
| blade rake angle | 5° |
| blade back angle | 10° |
| Specimen type and size (length x width x thickness) mm ³ | ISO180-2000 or GB/T 1843-2008: Type 1 specimen: 80 × 10 × 4; Type 2 specimen: 63.5 × 12.7 × 6.4; Type 3 specimen: 63.5 × 12.7 × 3.2 |
| Impact energy | Cantilever beam 11J, 5.5J or Maximum Impact Energy as specified by the user |
| Pendulum elevation angle | 150° |
| Power | AC 220V 50Hz |
| Dimensions | 360*240*680mm |
| Net Weight | Approx. 80kg |
AISRY ASR-XJJ-11B Digital Impact Tester Packing list
host X1, manual X1, warranty card X1, certificate X1
[Note] Because the manufacturer's packaging may be updated or upgraded, the detailed packaging list shall be subject to the latest standard configuration of the manufacturer.
