HealForce Smart Plus-N Laboratory ultrapure water machine DATASHEET
| Brand | HealForce | Model | Smart Plus-N |
|---|---|---|---|
| From | Name | Laboratory ultrapure water machine |
Specifications
| Inlet source | < 400 μS/cm (municipal tap water) |
| inlet pressure | 0.1-0.5 MPa |
| RO desalination rate | ≥ 98% (under certain influent conditions) |
| RO water Volume | 30L/H@25℃ |
| RO conductivity * | < 20 μS/cm |
| Configure EDI | No |
| TOC online monitoring | none |
| resistivity of ultrapure water | 18.2 MΩ•cm@25℃ |
| Total organic carbon removal rate TOC | <10ppb |
| Particulate matter (PM) | < 1/ml (with 0.22μm end point filter) |
| microorganism | < 1cfu/ml (with 0.22μm end point filter) |
| heat source content | < 0.001 Eu/ml (with imported ultrafiltration column) |
Packing list
After-sales instructions
None
[Note] For after-sales services outside the Chinese mainland, if the instrument requires repair, the shipping and possible associated taxes shall be borne by the sender. Generation address of the manual: http://en.nbchao.com/p/32213/Specification.html , which is only used by users who purchase commodities from the NBCHAO.
Created on : 2025/12/18