Japan OSP-150 L600φ 10 Customized Coating Metering rod
Japan OSP-150 L600φ 10 custom Coating Metering rod WFT 150μm, Total length 600mm, effective Spreader width 500mm, main rod diameter 10mm, surface process chrome plating, production process extrusion process, material 304 stainless steel.
OSP-
Imported D16-L2000 Metering rod Rod Holders Suitable for φ 16mm formed Metering rod
Login -
OSP OSP-16 L2000φ 16 Production Spreader Measurement Wire Bar
Login -
Japan OSP-09 L2000φ 16 custom coating rod 9μm/2m
Login -
Japan OSP-80 L600/φ 10 wide-wound drawdown Bar Customized Spreader coating bar
Login -
OSP-35 L2000mm φ 16mm Production Coating Metering rod Total length 2m Surface Eletroplating
Login
D-Bar Advantages:
Customers who use traditional wire scrapers often encounter a wide variety of problems.
(1) The steel wire is loose and the wire is broken
(2) It is not easy to clean and easy to block
(3) The surface shape cannot be changed freely
Is there a product that can replace the wire scraper?After several improvements, the D-BAR was finally developed.It was officially launched into the market in 2001.

The D-Bar can control wet film thicknesses as low as 1.5 μm, enabling ultra-thin coating
Comparison of the amount of coating on the reel rod and the D-Bar

Difference in coating weight: The bottom of the groove of the D-Bar is wider than that of a conventional wire scraper, so in general, the coating weight of the D-Bar is larger.
D-Bar Coating Rod Specifications
The length of the D-Bar specification can be customized, please contact us for detailsNorth and South Tide customer service

How to use:

When applying liquid to the surface of the substrate, adjust (scrape) the amount of liquid with D-Bar.
Application
The D-Bar series of coating rods for extrusion production produced by OSP in Japan are widely used in the following industries:
Membrane:Liquid crystal film, X-ray film, packaging film, etc
Glass:Automotive glass, liquid crystal glass, architectural glass, etc
Paper:Newspapers, light paper, wallpapers, special papers, etc
Packing Material:Cartons, tapes, wrapping paper, etc
Tape:videotapes, etc
Magnetic card:Tickets, recharge cards, etc

OSP OSP-150 L600 φ10mm Coating RodSpecifications
| LIST | VALUE |
|---|---|
| WFT | 150μm |
| Total length | 600mm |
| Effective Spreader Width | 500mm |
| Main rod diameter | 10mm |
| Surface process | chrome plating |
| Production process | Extrusion process |
| material | 304 stainless steel |
| Left and right hand grip | 50mm |
OSP OSP-150 L600 φ10mm Coating Rod Packing list
Custom Spreader Stick × 1, External Encasement Tube
[Note] Because the manufacturer's packaging may be updated or upgraded, the detailed packaging list shall be subject to the latest standard configuration of the manufacturer.
FAQ
- The experimental case of OSP Mayer Rods at inks Moulding [with video]
- What problems should I pay attention to when buying a wire rod applicator?
- Nanbei Chao technical engineer tells you: What are often asked when buying a wire rod?
- Frequently Asked Questions for Inventory 2022 Lines, Issue 1
- What wire rod applicator have users in the aluminum profile industry bought?
- Preparation of Ultrafine Silver Nanowire Transparent Conductive Films by Coating Machine + Wire Rod
- What kind of bar applicator have customers in the adhesive industry bought?
- Preparation of fluorescent anti-counterfeiting gravure ink with ink proofing machine
- What are the models of popular bar applicators?
- Which wire rod applicators have the printing industry purchased?


OSP-150 L600 φ10mm





