HENGPIN HP-DJD100 Pulp Beating Degree Tester 1oSR~ 100oSR

Introduction

HP-DJD100 pulp Freeness Tester (also known as pulp beating, beating, beating, percussion Tester, percussIon Meter, percussIon Meter) is a special instrument for measuring the performance of pulp water filtration. The product is designed according to the Schauber-Rigler method to measure the water filtration capacity of diluted pulp suspensions, i.e. the determination of the degree of beating. Its main technical indicators and performance parameters are in line with the relevant provisions of national standards.

Features

1. The appearance structure is simple, beautiful and simple to operate.

2. The pouring chamber (cup) is made of copper and electroplated to prevent rust and corrosion.

3. Manual pulping adopts manual compression sealing cone.

4. Use the three-legged leveling mechanism to adjust the alignment of the sealing cone to ensure the tightness of the sealing cone and the cylinder.

Meets standards

1. GB/T 3332 Determination of pulp refining degree (Schauber-Rigler method)

2. ISO 5267.1 Determination of water filtration properties of pulp – Part 1: Schauber-Rigler method

3. QB/T 1054 Measuring Instrument for Pulp Pulping Degree

[Note] Because the manufacturer's packaging may be updated or upgraded, the detailed packaging list shall be subject to the latest standard configuration of the manufacturer.