Dutch TQC cross-cut knife head, made of stainless steel SP1702/1703/1704/1705/1706
TQC cross-cut cutter head is made of stainless steel, Hardness reaches HRC58 +/- 2, high quality guarantees Cross Hatch Cutter accuracy, suitable for a variety of TQC Cross Hatch Cutter.
TQC sheen
-
Shanghai PUSHEN 1mm * 6 Tooth Cross Hatch Cutter
$ 151.00 -
JFL QFH-S600 adhesion plate (guide grid)
$ 143.00 -
TQC SP3020 adhesion tape 3M adhesion 7.6 N/cm
$ 171.00 -
PUSHEN HGQ 2mm single-edged paint film cross-cut instrument, standard with 2 2mm single-edged cutter heads, 11 teeth
$ 182.00 -
QFH film cross-cutting instrument YONGLIDA Adhesion Tester comes standard with two knife heads
$ 132.00
Introduction
TQC 100 grid knife head has SP1702,SP1703、SP1704、SP1705、SP1706 has five models, each model corresponds to a different test range, suitable for TQC different series of models of 100 grid knives, using stainless steel, longer service life.
Parameters
| Model | standard | Blade | Material | range |
| SP1702 | ISO/DIN 2409 | 6 teeth, spacing 1mm | stainless steel | <60μm (hard substrate) |
| SP1703 | ISO/DIN 2409 | 6 teeth, spacing 2mm | stainless steel | < 60 μm (soft substrate) > 61-120 μm |
| SP1704 | ISO/DIN 2409 | 6 teeth, spacing 3mm | stainless steel | 121-250µm |
| SP1705 | ASTM 3359 | 11 teeth, 1mm spacing | stainless steel | 0-50µm |
| SP1706 | ASTM 3359 | 11 teeth, spacing 1.5mm | stainless steel | 50-125µm |
Actual picture of the product
Take you to the Dutch TQC
TQC sheen SP1702 Cross-cut knife headSpecifications
| LIST | VALUE |
|---|---|
| Number of teeth | 6 teeth |
| Tooth spacing | 1mm |
| Instrument material | stainless steel |
| Application standard | ISO/DIN 2409 |
| Applicable film thickness environment | < 60 µm (hard substrate) |
TQC sheen SP1702 Cross-cut knife head Packing list
[Note] Because the manufacturer's packaging may be updated or upgraded, the detailed packaging list shall be subject to the latest standard configuration of the manufacturer.