QD-3072 Pulp Beating Degree Tester

Features

The pulp beating degree meter is a Shaw Boer type beating degree Tester, which adopts manual compression sealing cone.

Environmental Requirements:

1. Room temperature: 20°C±1°C.

2. The workbench is stable, which is convenient for adjusting the working datum.

3. The Operating Environment is clean, the air is clean and dust-free.

4. No vibration

Introduction

The beating degree Tester is a special testing instrument for pulp percussion degree determination/pulping degree determination. According to the relevant provisions of the standard GB/T 3332-2004 "Determination of Pulp Pulping Degree (Shober-Rigler Method)", the professional production of pulp pulping degree testing instrument, pulp pulping degree Tester, also known as pulp percussion degree Tester, is based on the phenomenon that the percussion degree of pulp is inversely proportional to the water filtration rate of pulp suspension. The Tester is designed to imitate the Schauber-Rigler slurry meter, which is used to determine the water filtration performance of slurry suspension, study the fiber condition and evaluate the slurry beating degree.

 Meets standards

ISO 5267/1 Pulp – Determination of water filtration properties – Part 1: Schauber-Rigler method

GB/T 3332-2004

[Note] Because the manufacturer's packaging may be updated or upgraded, the detailed packaging list shall be subject to the latest standard configuration of the manufacturer.