MODERNER DMJ-1 sanding testing machine, caulking plaster test
MODERNER sanding testing machine DMJ-1 is used for caulking plaster and similar products for sanding performance testing, in line with JC/T 2075 standard, DMJ-1 Reciprocating Frequency 37 +/- 2cpm, suitable plaster board size 430 × 170 × 12mm.
Moderner
DMJ-1
-
JINGKELIAN DM-IV Putty Abradability Tester
$ 1237.00 -
JFL QFM coating sanding resistance Tester magnetic suction cup sample easy loading and unloading
$ 618.00 -
JINGKELIAN DM-III putty responsiveness Tester for measuring the sanding performance of undercoated putty
$ 919.00 -
JINGKELIAN QFM coating sanding Tester, putty sanding Tester
$ 518.00 -
TRUIT TR 5250 Putty Abradability Tester undercoat Putty sanding resistance
$ 1128.00
Introduction
DMJ-1 type grinding test machine is designed according to the grinding performance test requirements of JC/T 2075-2011 caulking gypsum industry standard, and is suitable for chemical laboratory grinding performance testing of caulking gypsum and similar products. This machine uses dry sandpaper to reciprocally grind the test piece a set number of times under a specified load, and evaluates the grinding performance of the test piece based on the mass wear of the test piece.
The grinding testing machine is used in the testing process of chemical raw materials. Users should establish appropriate safety and protective measures and determine rules and regulations in accordance with relevant safety regulations before use.
Moderner DMJ-1 Sanding testing machineSpecifications
| LIST | VALUE |
|---|---|
| Friction velocity | 37±2cpm |
| friction load | 460±20g |
| Power | 380V 50Hz (three-phase) |
| Power | 90W |
| Sanding length | 380mm |
| Grinding head bottom | 90×40mm |
| Dimensions | 620*430*300mm |
| Host Weight | About 40kg |
Moderner DMJ-1 Sanding testing machine Packing list
machine X1, manual X1, certificate X1, warranty card X1
[Note] Because the manufacturer's packaging may be updated or upgraded, the detailed packaging list shall be subject to the latest standard configuration of the manufacturer.