HUIDA HD-6007 Side pressure ring compressive Strength Tester high-precision Sensors 200KG capacity
Using LOAD CELL force sensor, capacity 200KG, accuracy +/- 1%, can test a variety of strength and support force value unit conversion, up and down pressure plate size 100 * 100mm, working stroke 150mm.
Huida
HD-6007
-
HENGPIN HP-YSY3000 Electronic Compression Tester Cardboard Compression Tester
$ 2169.00 -
JINGWEN JW-101C1 paper compression Tester 7 inch touch screen
$ 1252.00 -
Puyun PY-H603 automatic compressive strength Tester, touch screen, side pressure/ring pressure/gluing/flat pressure
$ 1283.00 -
CHINA BLD-609A Side pressure/Ring compression testing machine
$ 949.00 -
Essence Instrument LD-ZXP-01 Ring Pressure Center Disc
$ 198.00
High-precision sensor sensing, the strength of the sample is displayed digitally through software analysis, used with various accessories, and can test the vertical compressive strength, ring compressive strength, bonding strength and flat compressive strength of the cardboard. The operation is safe and simple, and the force value unit can be adjusted. convert.
Huida HD-6007 Side compression/ring compression Strength TesterSpecifications
| LIST | VALUE |
|---|---|
| induction method | LOAD CELL Force Sensor |
| Capacity | 200KG |
| unit switching | Kg / N / Ib |
| Analysis degree | 1/10000 |
| precision | ±1% |
| Upper and lower pressure plate size | 100*100mm |
| Working Travel | 150mm |
| Weight | About 92kg |
Huida HD-6007 Side compression/ring compression Strength Tester Packing list
host X1, power cord X1, manual X1, certificate X1, warranty card X1
[Note] Because the manufacturer's packaging may be updated or upgraded, the detailed packaging list shall be subject to the latest standard configuration of the manufacturer.
FAQ
- How is corrugated cardboard edge compression strength (ECT) tested?
- Structure and Use of Type 48 Compression Tester
- Paper and Cardboard Measurement Method and Standard for Ring Compression Strength
- How to test Ring Compressive Strength (RCT)?
- How to test the compressive strength of the edges of packaged products?
- How to accurately place the specimen on the blank holder testing machine?