JINGWEN JW-501 Beating degree Tester
JINGWEN JW-501 beating degree Tester is mainly used for the measurement of diluted pulp suspension filtration rate, is a conventional laboratory instrument, JW-501 beating degree Tester Measurement range 0~100 SR (Schopper degree), sealing cone rising speed 100 +/- 10mm/s.
jingwen
JW-501
-
PFI pulp buckling degree ZY-PFI vertical refiner
$ 7999.00 -
Yongxin ZDJ-100 Pulp Beating Degree Tester
$ 968.00 -
YINUO YN-PFI01 PFI refiner, pulp laboratory beating PFI grinding method, vertical refiner, double disc grinding
$ 12717.00 -
YINUO YN-DJD01 Freeness Tester 0~100 Freeness Tester
$ 1291.00 -
Pulp suspension beating degree ZY-DJ beating degree Tester
$ 1066.00
Product Brief Introduction:
JW-501 hydraulic beating degree Tester is a new type of instrument researched and developed by our company according to the requirements of national standards. The instrument is mainly used to measure the filtration rate of diluted pulp suspension, and is a routine instrument in the laboratory, with a mature structure and clear technical requirements.
Standard basis:
The parameters and functions of this instrument are in line with national standards:
GB/T 3332-1982 Method for determining the degree of slurry beating (Schober-Rigler method)
jingwen JW-501 Beating degree TesterSpecifications
| LIST | VALUE |
|---|---|
| Measurement range | 0~100°SR |
| Rising speed of cone | 100±10mm/s |
| Overflow outlet discharge time | 149±1s |
| residual Volume | 7.5~8.0ml |
jingwen JW-501 Beating degree Tester Packing list
Host X1, power cord X1, manual X1
[Note] Because the manufacturer's packaging may be updated or upgraded, the detailed packaging list shall be subject to the latest standard configuration of the manufacturer.
FAQ
- Pulping process and equipment in paper preparation
- What is the difference between the free meter and the pulp beating meter?
- How to self-test the beating meter?
- Papermaking Process: The Difference Between Wet and Dry Process
- What is paper synthetic pulp