LD-BL-A 90 ° Peel strength Tester

Introduction

The 90° peel Strength Tester is specially used for plastic, non-woven fabrics, leather, cloth zippers and other products for tensile testing, tensile Strength Testers, equipped with different fixtures for coatings, plastic films, composite films, flexible packaging materials, adhesives, adhesive tapes, self-adhesives, rubber, paper, and other products for tensile testing, tensile strength and elongation, tensile strength and elongation, tensile strength and elongation, right-angle tear, heat sealing strength, tear strength, 180 ° peel strength (including T-type), 90 ° peel, puncture resistance test and other items.

Meets standards

GB/T2792 Test standard for peel force of adhesive tape, ASTM D3330,

Test Method:

1. Fold the free end of the specimen in half 90 degrees and peel it off from the breadboard with an adhesive surface of 25mm. Clamp the free end of the specimen and the test plate on the upper and lower grippers. The peel surface should be aligned with the testing machine line. The testing machine peels continuously at a peeling speed of 300mm/min±10mm, and there is an automatic Recorder to draw the peeling curve (GB/T2792-1998 adhesive tape peeling force test standard).

2. Test results: calculated according to the distance between 20-80mm after peeling.

3. Within the range of peeling duty, read a number every 20mm, and at least 4 numbers should be read. Find its average.

machine X1, manual X1, certificate X1, warranty card X1

[Note] Because the manufacturer's packaging may be updated or upgraded, the detailed packaging list shall be subject to the latest standard configuration of the manufacturer.