RDS 3 #3/8 "No. 3 Molded Applicator rod 6.9μm Spreader rod

The production process is formed, the wet film thickness is 6.9 μm, the diameter is 9.52mm, the Total length is 400mm, the width of the Spreader is 300mm, and the material is stainless steel.

Brand

SKU: NB033696

RDS

Model

Price

$ 163.00

Promotion

Service

The delivery and service By NBchao.Com

Get Quote

RDS shopSE

Information

Datasheet RFQ Contract Video Catalog Manual

What else did others buy

RDS 225G #3/8 "Experimental Spreader Rod, High viscosity Applicator rod 514.4μm

$ 174.00
RDS8 Mayer Rods 18.3μm experimental Film Applicator

$ 163.00
RDS 4 #1/2 "Steel Wire Drawdown Rod film thickness 9.1μm Wire diameter 0.36mm

$ 182.00
UK RK KHC.02.S Long coating rod Drawdown Plate set, choose 8 models from 0 to 9 wire rods

$ 908.00
UK RK KHC.10.8 coating rod WFT 100μm blue rubber head No. 8 rod

$ 154.00

Genuinegoods

RDS 3# 3/8" Applicator rod 3/8 "Overview
Specifications
Comments
FAQs

3# 3/8"

Applicator rod 3/8 "

The production process is formed, the wet film thickness is 6.9 μm, the diameter is 9.52mm, the Total length is 400mm, the width of the Spreader is 300mm, and the material is stainless steel.

Product description

The RDS wire rod coater is an imported high-precision coating rod. RDS3# is the hot-selling coating thickness rod number. The coating thickness is 6.9 μm and the rod diameter is 9.52mm. It is the most popular rod diameter for domestic (CN) users. series. The RDS forming coating rod adopts the extrusion process, which has the advantages of continuous wire and easy cleaning. The coating effect is the same as that of the wire-wound rod. The coating accuracy is 0.1 μm, and there is no need to be equipped with a coating handle. part.

RDS coating Rods Figure 1

RDS coating Rods Figure 2

RDS coating Rods Figure 3

RDS coating Rods Figure 4

RDS coating Rods Figure 5

RDS coating Rods Figure 6

RDS coating Rods Figure 7

RDS coating Rods Figure 8

RDS coating Rods Figure 9

RDS coating Rods Figure 10

RDS 3# 3/8" Applicator rod 3/8 "Specifications

LIST	VALUE
Production process	Formed
WFT	6.9µm
diameter	9.52mm
Total length	400mm
Application width	300mm
material	stainless steel

RDS 3# 3/8" Applicator rod 3/8 " Packing list

Stainless Steel Rod X1 Transparent Encasement Hose X1

[Note] Because the manufacturer's packaging may be updated or upgraded, the detailed packaging list shall be subject to the latest standard configuration of the manufacturer.

FAQ

[Q]

How to calculate the thickness of the Spreader, the solid content is 1%, and the number three stick is selected for each square greater than 4g, is that okay?

[A]

Can be https://tool.nbchao.com/mohou/calculated by wet film thickness calculator

[Q]

What is the difference between the same 3/8 "diameter round Mayer-Rod and this molding rod? Can it be replaced?

[A]

The main difference between the Mayer-Rod and the molding rod is the different process of groove formation. The wire rods of the same specification and different processes can be replaced by each other, and the wet film thickness is the same. The difference is because the groove shapes of the two are different (the molding is U-shaped groove, and the winding wire is V-shaped groove). The calculation of the Spreader amount is different, and the relative molded Spreader amount will be more. There is no difference for laboratory use.

[Q]

Moulding rod is better for winding or extrusion?

[A]

In theory, the Moulding effect is the same. The extrusion U-groove is relatively easy to clean, but it requires high asperity on the inner wall of the groove. The winding follows the Mayer principle, and the scraping is smoother. If used for pre-production Measurement, the extrusion Spreader is larger than the winding. The same film thickness was prepared in the laboratory, and the effect was the same.

[Q]

Can this cable stick be matched with a Film Applicator?

[A]

Whether it can be matched with the Film Applicator depends on the film width of the Film Applicator. Most Film Applicator film widths on the market are less than 40cm, and the rod diameter is less than 10mm, so it is suitable. But if the Film Applicator is specially customized, or the width exceeds 40cm, you need to choose a longer rod. For customization, please consult NBchao.

[Q]

Do you support customization? Such as wet film thickness and length?

[A]

Spreader rod length and main rod diameter support customization, but wet film thickness RDS has provided dozens of specifications covering more than 200 microns, and in principle does not accept customization.