RDS 4 #3/8 "4 Molded inks Scraper 9.1 μm Applicator rod

Formed production process, wet film thickness 9.1μm, diameter 9.52mm, Total length 400mm, Spreader width 300mm, stainless steel material.

Brand

SKU: NB033697

RDS

Model

Price

$ 163.00

Promotion

Service

The delivery and service By NBchao.Com

Get Quote

RDS shopSE

Information

Datasheet RFQ Contract Video Catalog Manual

What else did others buy

Genuinegoods

RDS 4# 3/8" Applicator rod 3/8 "Overview
Specifications
Comments
FAQs

4# 3/8"

Applicator rod 3/8 "

Formed production process, wet film thickness 9.1μm, diameter 9.52mm, Total length 400mm, Spreader width 300mm, stainless steel material.

Product description

NBCHAO is the authorized general agent of RDS in CHINA, and has a full range of RDS ink scrapers. In the past, RDS was more popular with 3/8 diameter wire-wound squeegee sticks. As domestic (CN) users choose more and more extruded sticks. RDS has launched a 3/8 diameter extrusion ink scraper, and the coating effect is the same as that of a wire wound rod. rds4# is a popular rod number, the thickness of the coating film is 9.1 μm, and it is often used for color comparison and color coating.

RDS coating Rods Figure 1

RDS coating Rods Figure 2

RDS coating Rods Figure 3

RDS coating Rods Figure 4

RDS coating Rods Figure 5

RDS coating Rods Figure 6

RDS coating Rods Figure 7

RDS coating Rods Figure 8

RDS coating Rods Figure 9

RDS coating Rods Figure 10

RDS 4# 3/8" Applicator rod 3/8 "Specifications

LIST	VALUE
Production process	Formed
WFT	9.1µm
diameter	9.52mm
Total length	400mm
Application width	300mm
material	stainless steel

RDS 4# 3/8" Applicator rod 3/8 " Packing list

Stainless Steel Rod X1 Transparent Encasement Hose X1

[Note] Because the manufacturer's packaging may be updated or upgraded, the detailed packaging list shall be subject to the latest standard configuration of the manufacturer.

FAQ

[Q]

No. 4 wire rod scraped out, what is the film thickness?

[A]

RDS 4 rod scraping wet film thickness is 9 microns.

[Q]

What number of Wire-wound drawdown bar do you use for ink painting?

[A]

If it is the right color, this one is OK. No. 4 or No. 5 is recommended.

[Q]

Excuse me, what diameter is the RDS extrusion molding?

[A]

Hello, there are 6.35mm and 9.5mm.

[Q]

What is the difference between the same 3/8 "diameter round Mayer-Rod and this molding rod? Can it be replaced?

[A]

The main difference between the Mayer-Rod and the molding rod is the different process of groove formation. The wire rods of the same specification and different processes can be replaced by each other, and the wet film thickness is the same. The difference is because the groove shapes of the two are different (the molding is U-shaped groove, and the winding wire is V-shaped groove). The calculation of the Spreader amount is different, and the relative molded Spreader amount will be more. There is no difference for laboratory use.

[Q]

Moulding rod is better for winding or extrusion?

[A]

In theory, the Moulding effect is the same. The extrusion U-groove is relatively easy to clean, but it requires high asperity on the inner wall of the groove. The winding follows the Mayer principle, and the scraping is smoother. If used for pre-production Measurement, the extrusion Spreader is larger than the winding. The same film thickness was prepared in the laboratory, and the effect was the same.