Language
Search
    Cart(0)
      总价元
      前往结算
      您的购物车是空的 : )
      All Categories
        Home> Mayer Rod> RDS> RDS 13# 3/8" Applicator rod 3/8 "
        RDS 13# 3/8" Applicator rod 3/8 "

        RDS 13 #3/8 "molding printing scraper 29.7 μm rod Coating Applicator

        Production process is formed, wet film thickness 29.7 μm, diameter 9.52mm, Total length 400mm, Spreader width 300mm, material stainless steel.

        Brand
        SKU: NB033705
        United States RDS
        Stock
        Loading…
        Price
        $ 163.00
        Promotion
        Service
          Service
          The delivery and service By NBchao.Com
          Get Quote
          VS
          RDSLOGO

          RDS shopSE

          Information
          Datasheet RFQ Contract Video Catalog Manual
          What else did others buy
          Genuinegoods

          • RDS 13# 3/8" Applicator rod 3/8 "Overview

          • Specifications
          • Comments
          • FAQs
          13# 3/8"
          Applicator rod 3/8 "
          • RDS 13 #3/8 "molding printing scraper 29.7 μm rod Coating Applicator
          • RDS 13 #3/8 "molding printing scraper 29.7 μm rod Coating Applicator Figure 1
          • RDS 13 #3/8 "molding printing scraper 29.7 μm rod Coating Applicator Figure 2
          Production process is formed, wet film thickness 29.7 μm, diameter 9.52mm, Total length 400mm, Spreader width 300mm, material stainless steel.

          Product description

          The RDS printing bar is a rod coater for laboratory use, which is manually coated. The rod length of the rds applicator is 40cm, and there are three different diameters of 6.35mm, 9.5mm and 12.7mm. This U.S. RDS 13# 3/8" scraping rod is a rod number with a diameter of 9.5mm. It is a extrusion-type rod coater without steel wire winding, and the thickness of the coating film is 29.7μm.

          RDS coating Rods Figure 1

          RDS coating Rods Figure 2

          RDS coating Rods Figure 3

          RDS coating Rods Figure 4

          RDS coating Rods Figure 5

          RDS coating Rods Figure 6

          RDS coating Rods Figure 7

          RDS coating Rods Figure 8

          RDS coating Rods Figure 9

          RDS coating Rods Figure 10


          VS

          RDS 13# 3/8" Applicator rod 3/8 "Specifications

          LIST VALUE
          Production process Formed
          WFT 29.7µm
          diameter 9.52mm
          Total length 400mm
          Application width 300mm
          material stainless steel

          RDS 13# 3/8" Applicator rod 3/8 " Packing list

          Stainless Steel Rod X1 Transparent Encasement Hose X1

          [Note] Because the manufacturer's packaging may be updated or upgraded, the detailed packaging list shall be subject to the latest standard configuration of the manufacturer.

          FAQ

          [Q]
          The solid content of the glue is between 50-70%, and the film thickness needs to be controlled at 20-40um.
          [A]
          Theoretically dry-film = wet-film * solid content, the selection of the rod is generally based on the wet film thickness of the film
          [Q]
          What is the difference between the same 3/8 "diameter round Mayer-Rod and this molding rod? Can it be replaced?
          [A]
          The main difference between the Mayer-Rod and the molding rod is the different process of groove formation. The wire rods of the same specification and different processes can be replaced by each other, and the wet film thickness is the same. The difference is because the groove shapes of the two are different (the molding is U-shaped groove, and the winding wire is V-shaped groove). The calculation of the Spreader amount is different, and the relative molded Spreader amount will be more. There is no difference for laboratory use.
          [Q]
          Moulding rod is better for winding or extrusion?
          [A]
          In theory, the Moulding effect is the same. The extrusion U-groove is relatively easy to clean, but it requires high asperity on the inner wall of the groove. The winding follows the Mayer principle, and the scraping is smoother. If used for pre-production Measurement, the extrusion Spreader is larger than the winding. The same film thickness was prepared in the laboratory, and the effect was the same.
          [Q]
          For the film used for fluorescence testing, PVA is mixed with SiO2/QDs solution. Can it be scraped with a wire rod?
          [A]
          OK
          [Q]
          Can this cable stick be matched with a Film Applicator?
          [A]
          Whether it can be matched with the Film Applicator depends on the film width of the Film Applicator. Most Film Applicator film widths on the market are less than 40cm, and the rod diameter is less than 10mm, so it is suitable. But if the Film Applicator is specially customized, or the width exceeds 40cm, you need to choose a longer rod. For customization, please consult NBchao.
          +RDS 13# 3/8" Applicator rod 3/8 " Big data
            +RDS 13# 3/8" Applicator rod 3/8 "Similar products
            +RDS 13# 3/8" Applicator rod 3/8 "Knowledge
            +RDS 13# 3/8" Applicator rod 3/8 "Standard
            +Navigation
            RDS
            RDS 13 #3/8 "molding printing scraper 29.7 μm rod Coating Applicator
            Service
            Order Guide
            Payment & Shipping
            After-sales
            Cooperation
            About Us
            Focus on online sales of Lab Testing Instruments

            CopyRight © NBchao.Com 2012-2024, All Rights Reserved.