RDS 18 #3/8 "Molded Spreader Wet Rod 41.1μm Experimental Coating Applicator

Production process is formed, wet film thickness 41.1 μm, diameter 9.52mm, Total length 400mm, Spreader width 300mm, material stainless steel.

Brand

SKU: NB033709

RDS

Model

Price

$ 162.00

Promotion

Service

The delivery and service By NBchao.Com

Get Quote

RDS shopSE

Information

Datasheet RFQ Contract Video Catalog Manual

What else did others buy

Genuinegoods

RDS 18# 3/8" Applicator rod 3/8 "Overview
Specifications
Comments
FAQs

18# 3/8"

Applicator rod 3/8 "

Production process is formed, wet film thickness 41.1 μm, diameter 9.52mm, Total length 400mm, Spreader width 300mm, material stainless steel.

Product description

RDS 18# coating wet rod has two coating processes: extrusion type and wire winding type, with three different rod diameters of 1/4'', 3/8'' and 1/2'', and the thickness of the coating film is 41.1 μm. This No. RDS18 applicator is an extrusion molding process, the Total length of the wire rod is 40cm, and it can be used with an automatic coating machine. RDS coating wet sticks are not only suitable for coating inks, but also widely used in printing, plastics, paper and other fields.

RDS coating Rods Figure 1

RDS coating Rods Figure 2

RDS coating Rods Figure 3

RDS coating Rods Figure 4

RDS coating Rods Figure 5

RDS coating Rods Figure 6

RDS coating Rods Figure 7

RDS coating Rods Figure 8

RDS coating Rods Figure 9

RDS coating Rods Figure 10

RDS 18# 3/8" Applicator rod 3/8 "Specifications

LIST	VALUE
Production process	Formed
WFT	41.1µm
diameter	9.52mm
Total length	400mm
Application width	300mm
material	stainless steel

RDS 18# 3/8" Applicator rod 3/8 " Packing list

Stainless Steel Rod X1 Transparent Encasement Hose X1

[Note] Because the manufacturer's packaging may be updated or upgraded, the detailed packaging list shall be subject to the latest standard configuration of the manufacturer.

FAQ

[Q]

Can a solution be applied to a nonwoven substrate?

[A]

Sure.

[Q]

Plastic inks Applicator rod Is this one formed?

[A]

Hello, yes.

[Q]

What is the difference between the same 3/8 "diameter round Mayer-Rod and this molding rod? Can it be replaced?

[A]

The main difference between the Mayer-Rod and the molding rod is the different process of groove formation. The wire rods of the same specification and different processes can be replaced by each other, and the wet film thickness is the same. The difference is because the groove shapes of the two are different (the molding is U-shaped groove, and the winding wire is V-shaped groove). The calculation of the Spreader amount is different, and the relative molded Spreader amount will be more. There is no difference for laboratory use.

[Q]

Moulding rod is better for winding or extrusion?

[A]

In theory, the Moulding effect is the same. The extrusion U-groove is relatively easy to clean, but it requires high asperity on the inner wall of the groove. The winding follows the Mayer principle, and the scraping is smoother. If used for pre-production Measurement, the extrusion Spreader is larger than the winding. The same film thickness was prepared in the laboratory, and the effect was the same.

[Q]

Can this cable stick be matched with a Film Applicator?

[A]

Whether it can be matched with the Film Applicator depends on the film width of the Film Applicator. Most Film Applicator film widths on the market are less than 40cm, and the rod diameter is less than 10mm, so it is suitable. But if the Film Applicator is specially customized, or the width exceeds 40cm, you need to choose a longer rod. For customization, please consult NBchao.