RDS 34 #3/8 "Mayer Rods 77.7μm wire rod Film Applicator

Formed, wet film thickness 77.7μm, diameter 9.52mm, Total length 400mm, Spreader width 300mm, stainless steel material.

Brand

SKU: NB033719

RDS

Model

Price

$ 161.00

Promotion

Service

The delivery and service By NBchao.Com

Get Quote

RDS shopSE

Information

Datasheet RFQ Contract Video Catalog Manual

What else did others buy

Genuinegoods

RDS 34# 3/8" Applicator rod 3/8 "Overview
Specifications
Comments
FAQs

34# 3/8"

Applicator rod 3/8 "

Formed, wet film thickness 77.7μm, diameter 9.52mm, Total length 400mm, Spreader width 300mm, stainless steel material.

Product description

RDS 34# wire Bar Coater has three different diameters of 6.35mm, 9.5mm, and 12.7mm, among which 9.5mm is the diameter series preferred by domestic (CN) users, and can be equipped with automatic film coating on domestic (CN) coating machines. The wet film thickness of this RDS34# 3/8" coating is 77.7μm. The film effect of the wire winding type and the extrusion type is the same. The total coating width is 300mm. It is suitable for ink, color paste, architectural coatings, Varnish, lithium battery and other coatings.

RDS coating Rods Figure 1

RDS coating Rods Figure 2

RDS coating Rods Figure 3

RDS coating Rods Figure 4

RDS coating Rods Figure 5

RDS coating Rods Figure 6

RDS coating Rods Figure 7

RDS coating Rods Figure 8

RDS coating Rods Figure 9

RDS coating Rods Figure 10

RDS 34# 3/8" Applicator rod 3/8 "Specifications

LIST	VALUE
Production process	Formed
WFT	77.7µm
diameter	9.52mm
Total length	400mm
Application width	300mm
material	stainless steel

RDS 34# 3/8" Applicator rod 3/8 " Packing list

Stainless Steel Rod X1 Transparent Encasement Hose X1

[Note] Because the manufacturer's packaging may be updated or upgraded, the detailed packaging list shall be subject to the latest standard configuration of the manufacturer.

FAQ

[Q]

Do you have an RDS with a length of 50cm?

[A]

RDS does not have a length of 500mm, the regular 400mm and 50cm need to be customized.

[Q]

The printing stick is 200 mesh, that is, there are 200 small holes on 0.001 square meters, and each small hole is directly about 50 microns; I just want to find one with a similar ink volume

[A]

70 to 80 micron wire rods are recommended.

[Q]

What is the difference between the same 3/8 "diameter round Mayer-Rod and this molding rod? Can it be replaced?

[A]

The main difference between the Mayer-Rod and the molding rod is the different process of groove formation. The wire rods of the same specification and different processes can be replaced by each other, and the wet film thickness is the same. The difference is because the groove shapes of the two are different (the molding is U-shaped groove, and the winding wire is V-shaped groove). The calculation of the Spreader amount is different, and the relative molded Spreader amount will be more. There is no difference for laboratory use.

[Q]

Moulding rod is better for winding or extrusion?

[A]

In theory, the Moulding effect is the same. The extrusion U-groove is relatively easy to clean, but it requires high asperity on the inner wall of the groove. The winding follows the Mayer principle, and the scraping is smoother. If used for pre-production Measurement, the extrusion Spreader is larger than the winding. The same film thickness was prepared in the laboratory, and the effect was the same.

[Q]

Can this cable stick be matched with a Film Applicator?

[A]

Whether it can be matched with the Film Applicator depends on the film width of the Film Applicator. Most Film Applicator film widths on the market are less than 40cm, and the rod diameter is less than 10mm, so it is suitable. But if the Film Applicator is specially customized, or the width exceeds 40cm, you need to choose a longer rod. For customization, please consult NBchao.