OSP OSP-50 L1000 Φ16 Formed wire scraper

OSP-50 L1000φ 16 Production Measurement Wire Bar 50μm

Japanese production of Measurement bar OSP-50 L1000φ 16 Film thickness 50μm, film width 100cm, is a custom bar, OSP-50 Measurement bar with 304 wear-resistant stainless steel, chrome-plated surface, diameter 16mm.

Brand

SKU: NB033905

OSP

Model

OSP-50 L1000 Φ16

Get Quote

OSP shop

Information

Datasheet

What else did others buy

Genuinegoods

OSP OSP-50 L1000 Φ16 Formed wire scraperOverview
Specifications
Comments
FAQs

OSP-50 L1000 Φ16

Formed wire scraper

Overview

Japan OSP-50 micron production profile wire rod (also known as metering rod) is a customized production line rod used to control the flow and maintain the uniformity of the coating in the production machinery and equipment such as paper and film.

OSP OSP-50 L1000 Φ16 Coated Metering Rod is a customized wire rod with a rod diameter of 16mm, a coating width of 1000mm, and a control coating thickness of 50 microns.

D-Bar Advantages:

Customers who use traditional wire scrapers often encounter a wide variety of problems.

(1) The steel wire is loose and broken

(2) It is not easy to clean and easy to block

(3) The surface shape cannot be changed freely

Is there a product that can replace the wire scraper?After several improvements, the D-BAR was finally developed.It was officially launched into the market in 2001.

OSP OSP-50 L1000 Φ16 Customized Coating Rod Detail Figure 1

The D-Bar can control wet film thicknesses as low as 1.5 μm, enabling ultra-thin coating

Comparison of the amount of coating between the winding rod and the D-Bar extruded bar

OSP OSP-50 L1000 Φ16 Custom Coating Rod Detail Figure 2

Difference in coating weight: The bottom of the groove of the D-Bar is wider than that of a conventional wire scraper, so in general, the coating weight of the D-Bar is larger.

D-Bar line rod specifications

The length of the D-Bar specification can be customized, please contact us for detailsNorth and South Tide customer service

OSP OSP-50 L1000 Φ16 Custom Coating Rod Details Figure 3

How to use:

OSP OSP-50 L1000 Φ16 Custom Coating Rod Detail Figure 4

When applying liquid to the surface of the substrate, adjust (scrape) the amount of liquid with D-Bar.

Application

The D-Bar series of coating rods for extrusion production produced by OSP in Japan are widely used in the following industries:

Membrane:Liquid crystal film, X-ray film, packaging film, etc

Glass:Automotive glass, liquid crystal glass, architectural glass, etc

Paper:Newspapers, light paper, wallpapers, special papers, etc

Packing Material:Cartons, tapes, wrapping paper, etc

Tape:videotapes, etc

Magnetic card:Tickets, recharge cards, etc

OSP OSP-50 L1000 Φ16 Custom Coating Rod Detail Figure 5

OSP OSP-50 L1000 Φ16 Formed wire scraperSpecifications

LIST	VALUE
WFT	50μm
Total length	1000mm
Effective Spreader Width	1000mm
Main rod diameter	16mm
Surface process	chrome plating
Production process	Extrusion process
material	304 stainless steel

OSP OSP-50 L1000 Φ16 Formed wire scraper Packing list

Custom Spreader Stick × 1, External Encasement Tube

[Note] Because the manufacturer's packaging may be updated or upgraded, the detailed packaging list shall be subject to the latest standard configuration of the manufacturer.

FAQ

[Q]

Is the price listed on the website the final cost for overseas purchases?

[A]

No, it isn't. This is the ex-factory price of the product in the Chinese Mainland. In addition to this price, buyers from different countries need to account for additional costs such as shipping fees, tariffs, and others. For specific regional quotes, please consult our customer service or fill out a quotation form.

[Q]

What is the specific process for purchasing the product?

[A]

First, please click on the quotation form on the website and fill in detailed information. Our customer service personnel will then send you a quotation based on your specific country and region, confirming payment and delivery methods. Following this, we proceed with contract signing, payment, and shipment. You can then await delivery.

[Q]

What should I do if the instrument I purchase needs repair?

[A]

After-sales repair for overseas instruments is an unavoidable issue. Our repair terms stipulate that the sender is responsible for the shipping and insurance costs incurred for the repair. Repairs within the warranty period are free, while repair costs beyond the warranty period are determined based on the actual situation.

+OSP OSP-50 L1000 Φ16 Formed wire scraper Big data

+OSP OSP-50 L1000 Φ16 Formed wire scraperKnowledge

+Navigation