DAQTECH DT-60A Furnace temperature tracker 6 channels -100-500 ℃

Description

Accurate furnace temperature curve test, professional analysis software, for wave soldering and reflow soldering furnace temperature curve test analysis to provide accurate process index judgment and optimization. This temperature Tester is widely used in the electronics industry for SMT placement and plug-in PCB soldering processes, and is also suitable for temperature mapping and analysis in other industries (e.g., food, environmental, painting, ovens, tunnel furnaces...... ） 

Standard configuration

1. A temperature Tester host 2, an instrument protection box 3, a thermocouple 4, a software installation disk 5, and a data output line 

6. High temperature adhesive tape 7, charger 8, instrument case 9, scissors 10, tweezers 

11. Heat-insulating gloves 12, cross screwing knife 13, high-temperature tin wire 14, user manual 15, product certificate

Analysis Settings (Data Analysis Report)

1. Set the temperature and transportation speed in the temperature zone of the reflow oven and the wave furnace

2. Location name of temperature sampling point and PCB schematic diagram

3. The time between two temperature values

4. The slope between two temperature values

5. The slope between two time points

6. The time when the specified temperature is exceeded

7. Maximum temperature and temperature at any point in time

8. Horizontal temperature line, vertical time line and time between two hours

9. Grid editing, refinement and curve zoom display

10. Simulation curve function, process optimization, test date and time

11. Enter the company name, product name and remarks information

12. Select the printing direction (horizontal printing and vertical printing)

13. The temperature data report can be exported to Excel for editing

14. Insert the picture function to make the location of the temperature test point clear at a glance

15. Call multiple sets of temperature curves for comparison

16. There are two Operating Modes: real-time monitoring and instrument recording

17. Manual clearing and software clearing of instrument memory data

18. There are three starting modes: manual, specified time and specified temperature

What's new in software data analysis

1. Increase process index (PWI) analysis

2. Increase solder paste information management

3. Increase equipment information management

4. Increase product information management

5. The horizontal temperature line and the time point line can be moved and edited

6. The instrument will not lose data when the instrument is powered off

7. The Tester can continuously record 256 sets of temperature data, which can be downloaded in groups at one time, eliminating the need to run back and forth between the workshop and the office, wasting your precious time

DT series temperature Tester is suitable for: SMT reflow soldering, wave soldering, automotive coating, powder coating, non-stick coating, mobile phone screen, food processing, chemical industry, glue curing, metal electroplating baking paint and other baking processes of the furnace temperature temperature tracker, is a professional oven/tunnel furnace/oven temperature Tester in CHINA

[Note] Because the manufacturer's packaging may be updated or upgraded, the detailed packaging list shall be subject to the latest standard configuration of the manufacturer.