JINGWEN JW103C-01 paper Tensile Strength Tester 100N 400mm

Introduction

It is suitable for the test of paper strength, plastic film, composite film, adhesive, adhesive tape, medical patch, protective film, release paper, rubber, artificial leather, paper fiber, etc. The instrument integrates tensile, peeling, tearing, Professional and independent test procedures such as heat sealing, constant elongation, tensile, compression, and ring tack provide users with a variety of test items.

product features

1. Using ball screw drive, more stable and accurate.

2. Advanced stepping motor is adopted, with low noise and precise control.

3. Large-screen touch screen display, Chinese menu, real-time display of test force, speed, displacement and curves: force-time, force-deformation, force-displacement, etc.

4. Built-in micro-printer, print data and test results: tensile strength, elongation.

5. Visual display of test results: After a set of tests is completed, display the measurement results and print statistical reports, including average , maximum, and minimum values.

6. Microcomputer data processing and control, automatic reset, data memory, overload protection, etc.

7. AC speed regulation, automatic shutdown if the sample is damaged, and photoelectric safety limit.

8. The test force is not divided into gears throughout the process, and it can be switched automatically.

9. Adding accessories can complete compression, bending, shearing, tearing strength, etc.

Test Principle

The sample is clamped between the two clamps of the fixture, and the two clamps move relative to each other. The force value change and displacement during the test are collected through the force sensor on the movable clamp and the displacement sensor built in the machine. Changes, so as to calculate the tensile, tearing, deformation rate and other performance indicators of the sample.

Some application examples

GB 8808, GB/T 1040.1-2006, GB/T 1040.2-2006, GB/T 1040.3-2006, GB/T 1040.4-2006, GB/T 1040.5-2008, GB/T 4850-2002, GB/T 12914-2008, GB/T 17200, GB/T 16578.1-2008, GB/T 7122, GB/T 2790, GB/T 2791, GB/T 2792, GB/T 17590, ISO 37, ASTM E4, ASTM D882, ASTM D1938, ASTM D3330, ASTM F88, ASTM F904, JIS P8113, QB/T 2358, QB/T 1130

product configuration

Standard configuration: host, silent thermal printer, universal fixture, professional software

Optional: Pneumatic fixture, standard pressure roller, test plate, sampling knife

Host X1, silent thermal printer X1, general fixture X1, professional software X1

[Note] Because the manufacturer's packaging may be updated or upgraded, the detailed packaging list shall be subject to the latest standard configuration of the manufacturer.