YINUO YN-NMY01 Printing ink wear Tester inks wear Tester 0~9999 times, four gears 10N 20N

purpose function

Ink printing decolorization Tester is suitable for testing the ink adhesion fastness of packaging printing, UV printing, label printing, book printing and other products in the production of offset printing and flexographic printing. The Ink Abrasion Tester is a testing machine used to detect the ink friction resistance of ink printed matter. According to the friction load of the international standard, the paper, cardboard, leather and other sample prints are rubbed back and forth at a specified speed to test the ink adhesion, and the ink is judged by measuring the decrease in density (or the decrease in coating thickness) before and after friction. Abrasion resistance of layers (or coatings)

Features

Adopt new module circuit design.

Adopt digital display and control;

Input the number of frictions before the test, and the test can realize automatic control, and a buzzer will prompt after each test;

The control system has a power-off memory function. After power-on each time, the input parameter state before the last power-off is maintained;

The actuator uses a high-precision gear reduction micro-motor to drive the friction body to perform linear reciprocating friction motion;

It fully meets the requirements of national standards and is compatible with international standards.

complete-built unit X1, manual X1, certificate of conformity X1, warranty card X1

[Note] Because the manufacturer's packaging may be updated or upgraded, the detailed packaging list shall be subject to the latest standard configuration of the manufacturer.