YINUO YN-ZSY-4 offset plate inks spot color Proofer inks color display instrument, offset printing four-color offset plate printing two-color optional

Instructions

1. Wiring requirements for this device: live wire, neutral wire, ground wire, and third wire are required for safe use of electricity. The machine has a built-in leakage switch.

2. Turn on the power switch, and prepare paper, ink, and cleaning cloth after color development (white is better).

3. Install the paper, adjust the viscosity of the ink, put the ink to be tested into the chest of the ink injector, and discharge the air inside until the ink overflows.

4. Align the nozzle of the ink injector with the surface of the ink distribution rubber roller, and install the amount you need to inject.

5. Open the operation screen and set the data, press "Ink Distributing", the instrument will automatically execute the computer program.

6. Press "Print" after the ink distribution stops, and the printing is very good.

7. After printing and sampling, you can start to clean the ink on the rubber roller and steel roller.

8. Clean the rubber roller and steel roller effectively.

9. Turn off the power after the work is completed.

10. In thunderstorm weather, try not to use this device. Because there are many electronic accessories in it, pay special attention to the machine not to be powered off for a long time. It is recommended to turn it on twice a month.

Ink distribution pressure and printing pressure adjustment

1. Press the "emergency stop" switch between the steel roller and the rubber roller during ink distribution, and then unscrew the emergency stop switch to power on after the machine stops. There will be an indentation with a width of 4-5mm between the two rollers, and observe the indentation Balance.

2. The pressure adjustment of the blanket cylinder and ink distribution rubber roller, there is a scale on the left and right sides, balance adjustment, the pressure effect is flat, clear and tidy. Excessive pressure will cause pattern deformation and ink convex edge, and small pressure will cause white spots to be false.

host X1, manual X1, certificate X1, warranty card X1

[Note] Because the manufacturer's packaging may be updated or upgraded, the detailed packaging list shall be subject to the latest standard configuration of the manufacturer.