DRICK LX-D Hardness Tester
DRICK LX-D Hardness Tester is an instrument for measuring the Hardness of vulcanized rubber and plastic products. The LX-D Hardness Tester needle travel range is 0-2.5mm, the dial value is 0-100 °, and the pressure at the end of the crimp is 0.55N-8.06N (56-822g).
Drick
LX-D
-
ShenyangTX W-20b Webster Hardness Tester for Small Aluminum Profiles and Aluminum Pipes with an Inner Diameter Greater than 6mm
$ 1114.00 -
Defelsko PosiTector BHI3 Pap Hardness Tester (Premium)
$ 2160.00 -
LEEB W-20b Webster Hardness Tester for measuring aluminum alloys, workpiece size thickness 0.4-8 mm
$ 466.00 -
DUBAN DB20-LX-NT Hardness pen/Newton pen
$ 343.00 -
AMITTARI AW-20A + Webster Hardness Tester sample size 0.6-13 mm
$ 710.00
Introduction
The LX-D rubber Hardness Tester is an instrument for measuring the hardness of vulcanized rubber and plastic products. It implements the relevant regulations in various standards of GB527, GB531 and JJG304. This Hardness Tester is installed on the load measuring stand of the same model produced in a supporting manner, and can measure the standard hardness of rubber and plastic standard test pieces in the laboratory. You can also hold the hardness meter head to measure the surface hardness of rubber (plastic) objects mounted on the equipment.
Drick LX-D Hardness TesterSpecifications
| LIST | VALUE |
|---|---|
| Pin stroke range | 0-2.5mm |
| Dial value | 0-100° |
| Pin end pressure | 0.55N-8.06N(56-822g) |
Drick LX-D Hardness Tester Packing list
host X1, manual X1, certificate X1, warranty card X1
[Note] Because the manufacturer's packaging may be updated or upgraded, the detailed packaging list shall be subject to the latest standard configuration of the manufacturer.