BIO0021 Puro80 Laboratory Water Purification System, three-stage water 80L/H water storage tank 30L

Introduction to Puro pure water system

By using high-recovery reverse osmosis (RO) technology, Puro can effectively remove 99% of the pollutants in the supply water (here refers to tap water), and the pure water produced is called primary water (dish grade water). Puro supplies pure water directly to glassware washers and other laboratory .

Puro can produce 10-1000 liters of industrial grade water/RO water per day

Ro water is suitable for providing water for glassware washing machines, autoclaves, steam generators and Incubators, etc. It can also be used to prepare higher levels of pure water. The built-in booster pump simplifies the installation steps, and at the same time avoids the reduction of pure water output and damage to the filter consumables due to the pressure difference of the supply water inflow.

Features

• low running cost

• Pure water replenishment rate 10-80 liters/hour

• New recirculation system extends RO membrane life

• Can be mounted on benches, walls and on top of storage tanks

• Water storage tanks are available in different volumes: 30 liters, 60 liters and 100 liters

• Filters are easy to replace

Environmental friendly

Due to the innovative configuration of the RO membrane, the Puro has up to 50% water recovery and produces less waste water.

After the conductivity is measured, the water that does not meet the requirements is not directly discharged , but is returned to the system to continue circulating and filtering.

host X1, manual X1, certificate X1, warranty card X1

[Note] Because the manufacturer's packaging may be updated or upgraded, the detailed packaging list shall be subject to the latest standard configuration of the manufacturer.