BIO0021 Alto TOC Laboratory Water Purification System
BIOFIL-
MOLECULAR MP-20L Lab water purifier Water production rate 20L/h
$ 2682.00 -
TIANMA UPTM-B100 Vertical ultrapure water mechanism Water volume 100L/H
$ 2984.00 -
BIO0021 Puro10 Laboratory Water Purification System, three-stage water 10L/H water storage tank 30L
$ 5515.00 -
GUOHUA SYZ-A quartz sub-boiling high-purity water distillation unit, water output: 400~500ml/h
$ 448.00 -
TIANMA UPTM-C60 Vertical ultrapure water mechanism Water volume 60L/H
$ 4500.00
Introduction
Alto mainly produces high-grade pure water with a resistivity of 18.2MΩ-cm. The supply water of this system needs to come from a treated water source, and fresh pre-treated water can be produced into Grade I water in a timely manner as needed. There are two water dispensing methods to choose from, the integrated smart water dispenser and the remote mobile water distributor. The water dispensing speed can reach 2 liters per minute. At the same time, you can also set the water volume and distribution speed you need on the water distributor through intuitive and simple software controls, and the water distributor will accurately discharge water according to the amount and speed. The consumables of the Alto pure water system also have the advantages of being easy to replace and durable.
Alto can produce 120 liters of laboratory grade I water per hour (when the supply water is sufficient). Grade I water is a higher level of pure water in the laboratory. It is mainly used in molecular biology, electrophoresis, cell and tissue culture, sequencing, HPLC, genetics, pharmacology and any other application fields with strict requirements.
In some experiments, organic matter is likely to affect the experimental results, so it is necessary to monitor the TOC (total organic carbon) in the water. This system is equipped with a TOC Detector which will provide you with excellent assurance of your water use.
Features
*Ultrapure water can be dispensed at rates up to 2 liters per minute
*The UV in the quartz sleeve can emit dual-wavelength ultraviolet rays of 185nm and 254nm
*Get water at any time, ready to use
*Endotoxin-free, pyrogen-free
*Removable remote diverter available
*Easy to replace consumables and low replacement cost
*The operating software is simple and intuitive
*Run quietly
*Can be installed above the workbench, below the workbench, and on the laboratory wall
*Comprehensive water quality monitoring, including TOC monitoring
Environmental innovation:
This model of water purifier has low energy consumption, and the power consumption of running one Alto water purifier is only equivalent to that of a household light bulb. As a result, the system helps reduce pollution, protects valuable natural resources, and saves money.

BIOFIL Alto TOC Laboratory pure water systemSpecifications
| LIST | VALUE |
|---|---|
| distribution rate | 2L/min |
| Electrical resistivity | 18.2MΩ·cm |
| TOC content | 1~5ppb |
| bacteria | <1cfu/ml |
| Feed water Mass | <30μs/cm |
| water supply pressure | 0.1~6bar |
BIOFIL Alto TOC Laboratory pure water system Packing list
machine X1, manual X1, certificate X1, warranty card X1
[Note] Because the manufacturer's packaging may be updated or upgraded, the detailed packaging list shall be subject to the latest standard configuration of the manufacturer.


Alto TOC





