PNSHAR PN-CT50KCF Box Compression Tester 1200 × 1200mm

Introduction

PN-CT50KCF full box compression testing machine is a domestic (CN) cost-effective testing instrument designed by our company for compression and stacking testing of large corrugated cartons, honeycomb cartons and other packaging materials. Its performance parameters and technical indicators comply with GB/ T 4857.3, GB/T 4857.4 and ISO 12048 ISO 2234 stipulate that it is mainly used for the compressive strength test of various small and medium-sized corrugated cartons with a compressive strength less than 50kN or made of other materials, such as large corrugated cartons, large honeycomb cartons, general turnover Packaging boxes, sports equipment packaging boxes, refrigerator packaging boxes, air conditioner packaging boxes, washing machine packaging boxes, mechanical parts packaging boxes, motorcycle packaging boxes, bicycle packaging boxes, grain and oil packaging boxes, solar energy packaging boxes, etc.

Three Operating Modes: 

1. Compression test: measure the compressive strength and deformation of the box. The testing machine applies an initial load to the sample and takes this as the starting point of deformation, and then continues to apply pressure on the sample until the sample is crushed. Automatically record pressure and deformation.

2. Fixed value test: The overall performance of the box can be tested according to the set pressure and deformation.

3. Stacking test: simulates the stacking state of the warehouse, and can conduct stacking tests under different conditions. The upper pressure plate of the testing machine moves downward to pressurize the sample to the pre-determined pressure. It stops, starts timing and calculates the deformation of the sample. Under the influence of the compression deformation of the specimen, the force value continues to decrease. When the pressure drops to 2% of the set value, the system automatically pressurizes to the test load and maintains it until the specified stacking time is reached, and the test is terminated. When the pressure of the specimen reaches the set shape, the test is automatically terminated.

Implementation standards

GB/T 4857.3, GB/T 4857.4, ISO 12048, ISO 2234, QB/T 1048

Features

1. Adopt new module circuit design, with WIFI Internet of Things function. After being connected to the Internet, the test results can be saved to the cloud server, and can be queried and generated through the dedicated QMS quality management system;

2. Real-time display of pressure and deformation curves;

3. Pre-set parameters, one-click measurement, simple operation;

4. It has statistical functions, showing the average value, maximum value, minimum value, standard deviation and coefficient of variation;

5. Safety device: overload emergency stop button control, up and down limit control, over-range prompt function.

6. The control circuit part adopts modular design and is easy to maintain;

7. It adopts a double screw and four guide column mechanical structure, and has a reducer to drive the belt transmission for deceleration. It has good parallelism, good stability, strong rigidity and long service life;

8. Using servo motor control, it has the advantages of high precision, low noise, high speed, etc.;

9. In terms of force detection, a high-speed ARM processor, four high-precision force sensors and a high-speed and high-precision AD converter are used with a unique sampling algorithm to ensure real-time and accuracy of sampling.

10. Built-in thermal printer for easy printing of test reports; 

11. Can be connected to computer software, and test data can be exported to EXCEL to facilitate data storage, analysis and management.

machine X1, manual X1, certificate X1, warranty card X1

[Note] Because the manufacturer's packaging may be updated or upgraded, the detailed packaging list shall be subject to the latest standard configuration of the manufacturer.