Germany NFe 5mm eddy current thickness probe QNix7500 Thickness Gauge
QNix NFe5mm Thickness Gauge probe is a dedicated thickness probe for QNix7500 Thickness Gauge, with a thickness measurement range of 5000 microns. This Thickness Gauge probe is a Thickness Gauge probe based on eddy current principle, and the measurement surface is not less than φ 25mm.
Qnix
7500 NFe 5mm
-
Defelsko PosiTector 6000 FKS3 Coating Thickness Gauge magnetic Induction thickness coating probe
$ 1641.00 -
German EPK probe N1.6 eddy current Thickness Gauge probe, thickness range 0~1600um
$ 1443.00 -
LANDTEK CM8855 coating Film Thickness Gauge Integrated F magnetic Induction /NF eddy current statistical function
$ 489.00 -
German PHYNIX Surfix SX-N0.5A Split Micro Probe Coating Thickness Gauge
$ 2062.00 -
LANDTEK CTG-CF coating calibrated diaphragm
$ 106.00
Introduction
The German QNix NFe5mm Thickness Gauge probe is an eddy current coating Thickness Gauge probe with a thickness measurement range of 0~5000 microns. The NFe5mm Thickness Gauge probe is a matching probe for the QNix7500 anti-corrosion layer Thickness Gauge, with a measurement accuracy of 0~1999 μm. : ±(1μm+2%); 2000~5000μm: ±3.5%.
Qnix 7500 probe model table
| model | Fe-2000 | Fe-5000 | Nfe-2000 | Nfe-5000 | Fe/Nfe-2000 | Fe/Nfe-5000 |
| matrix | iron | iron | non-iron | non-iron | Iron/non-iron | Iron/non-iron |
| Probe form | Integrated/split | Integrated/split | Integrated/split | Integrated/split | Integrated/split | Integrated/split |
| Measuring range | 0~2000μm | 0~5000μm | 0~2000μm | 0~5000μm | 0~2000μm | 0~5000μm |
| measurement accuracy | 0~1999μm: ±(1μm+2%) | 0~1999μm: ±(1μm+2%) ; 2000~5000μm: ±3.5% | 0~1999μm: ±(1μm+2%) | 0~1999μm: ±(1μm+2%) ; 2000~5000μm: ±3.5% | 0~1999μm: ±(1μm+2%) | 0~1999μm: ±(1μm+2%) ; 2000~5000μm: ±3.5% |
| Minimum measuring surface | Fe: Ï25mm; NFe: Ï25mm | |||||
| Minimum radius of curvature | Convex surface Ï5mm, concave surface Ï25mm | |||||
| Minimum substrate thickness | Fe: 200μm; NFe: 50μm | |||||
Qnix 7500 NFe 5mm probeSpecifications
| LIST | VALUE |
|---|---|
| Measurement principle | Eddy Current |
| Measurement range | 0~5000μm |
| margin of error | ±2~3.5％ |
| Minimum measurement surface | Φ25mm |
| Minimum radius of curvature | Convex: 5mm; Concave: 25mm |
| thinnest substrate | 50μm |
| Interface | USB or RS232 |
Qnix 7500 NFe 5mm probe Packing list
Probe X1
[Note] Because the manufacturer's packaging may be updated or upgraded, the detailed packaging list shall be subject to the latest standard configuration of the manufacturer.