FANGRUI ZMD-3 Electronic Density Meter Solid Powder, Ointment Density Test 500g
FangRui
ZMD-3
MDY-2
ZMD-1
ZMD-2
-
XINYUN XY3002CM Density balance Density scale, solid + liquid
$ 319.00 -
FRARIV C100M Standard Tapped Density Tester, Pharmacopoeia Compliant, Single Station
$ 1128.00 -
FRARIV C200N Dual Station Enhanced Tapped Density Meter, Compliant with Pharmacopoeia
$ 1439.00 -
XIONGFA MDJ-300A Solid Density Meter measurement range 0.01g~ 300g
$ 298.00 -
FRARIV C100A Standard Powder Tapped Density Meter, Single Station, Powder Tapped Density
$ 1128.00
Widely used in many industries such as electronics, rubber, plastics, wires and cables, auto parts, ferrite, powder metallurgy , food, beverages, flavors and fragrances, cosmetics and non-metals.
Standards compliant
The instrument fully complies with the following standards
âGB/T 11540-2008 Determination of relative density of spices
âGB/T 611-2006 General method for density determination of chemical reagents
âGB/T 1463-2005 Test method for density and relative density of fiber reinforced plastics
âJJG 171-2004 Calibration Regulations for Liquid Relative Density Balances
âGB/T 5009.2-2003 Determination of relative density of food
âGB1033-1986 plastic density and relative density test, etc....
Test steps
Taking common rubber/plastic as an example, the test steps only require a few steps, the data is accurate, and the operation is quick and easy.
Select model
ZMD-3 and ZMD-4 can meet the density test of solid powder and ointment
MDY-2 model is a special model for testing liquid density.
Optional
The MDY-2 model is used with a circulating constant temperature bath and can control the temperature from 5℃ to 90℃ with an accuracy of 0.1℃.
FangRui ZMD-3 Electronic Density MeterSpecifications
| LIST | VALUE |
|---|---|
| Weighing range | 0~500g |
| Resolution | Density/specific gravity: 0.01g /cm ³, weighing: 0.01g |
| Test Weight | 200g |
| Test disk diameter | 130mm |
| Test method | Solid specific gravity automatic calculation; Liquid Density direct reading |
| Dimensions | 320*190*330mm |
| Power | 220v / 0.5A 50HZ |
| Density Measurement range | 0~500g/cm³ |
FangRui ZMD-3 Electronic Density Meter Packing list
Host X1, 1cm3 standard parts X 1, double-decked weighing plate X 1 forceps X1, certificate X 1, test weight X1, power cord X 1, instruction manual X1, warranty card X 1, small Glass beaker X 1, large glass X 1
[Note] Because the manufacturer's packaging may be updated or upgraded, the detailed packaging list shall be subject to the latest standard configuration of the manufacturer.