BANTE S30-I wireless bluetooth iodine Ion Meter 0.00000001~ 1mol/L

High-performance wireless Bluetooth Ion Meter, suitable for Android smartphones or tablets, 5-point key calibration, the meter can be equipped with various ion selective electrodes, measurement accuracy: 1% FS.

This S30-I is used to test the solubility of iodine Ion Meter, the ion concentration measurement range is 0.00000001~1mol/L, and the measurement accuracy is ±1% FS.

Features

• High-performance Bluetooth Ion Meter, providing 5 ion concentration measurement methods.

• Optional ion concentration units, including ppm, mg/L, mol/L and mmol/L.

• 2 to 5 point calibration, including 8 concentration calibration points are optional.

• Electrode management, can store 3 electrode slopes and recall calibration data.

• Manual temperature compensation to eliminate measurement errors caused by temperature deviation.

• Automatic end point locking, keeping stable readings for easy viewing and recording.

• Timed interval readings, sending measurement data to memory or printer.

• Limit alarm, automatically warns if the measured value exceeds the set range.

• Calibration Due Reminder, reminding users to calibrate the meter regularly.

• Calibration report showing date, time, calibration point and slope.

• Password protection to prevent unauthorized calibration and setup.

• Multi-parameter measurement, can connect Bluetooth conductivity and Dissolved Oxygen Meter to the device and display the measured value.

• Reset function, automatically restores the instrument to factory default settings.

S series selection

S10: Meter, pH standard buffer, carrying case

S20: Meter, solution storage bottle, carrying case

S30: Measuring instrument, ion selective electrode (made in USA), standard solution (100 /1000ppm), ionic strength adjuster, carrying case

S40: measuring instrument, water hardness electrode (made in UK), standard solution (0.01/0.1mol/L), ionic strength adjuster, carrying case

S50: Meter, conductivity standard solution, carrying case

S60: Meter, Dissolved Oxygen Electrode Made in USA, ( ) Electrolyte, Electrode Diaphragm Cap, Carrying Case

S30 series specification parameter table

Host X1, electrode X1, calibrating liquid X2, enhancer X1, carrying case X1, manual X1, certificate X1, warranty card X1

[Note] Because the manufacturer's packaging may be updated or upgraded, the detailed packaging list shall be subject to the latest standard configuration of the manufacturer.