EPK MiniTest 2500 F10 Coating Thickness Gauge Plastic-like coatings on tanks, pipes and containers

The MiniTest 2500 coating Thickness Gauge can be used with a wide range of transducers, different calibration methods and evaluation options for a wide range of tasks in the field of coating measurement.

Application scenarios

Non-destructive measurement covers the following measurement ranges:

0~50 mm is used for non-magnetic coating on steel

0~100 mm is used for insulating coating on non-ferrous metals

Heat-resistant probes are suitable for temperatures up to 250°C and 350°C

Pencil-shaped probes are measured in tubes and tubes

All probes are equipped with wear bars to ensure long service life on abrasive substrates.

MiniTest 2500 andMiniTest 4500Both models are equipped with a huge data memory that can store up to 2 million measured values, which can be in direct mode (MiniTest 2500) or classified as an APPLICATION-BATCH memory structure.

Data transfer to PC via USB interface; The MiniTest 4500 also offers Bluetooth connectivity.

The ergonomic design, clear display, one-touch operation and illuminated keypad, among other practical features, add high customer value to the MiniTest 2500-4500 meter series.

apply

NDT Thickness Gauges are suitable for:

Non-magnetic coating on steel

Insulating coatings on non-ferrous metals

Copper layer on an insulating substrate

Powder coatings on steel and non-ferrous metals

features

A wide range of wear-resistant probes are available for a variety of applications

Universal probes with automatic substrate inspection can quickly measure steel and non-ferrous metals

Wear-resistant special probes with virtually unlimited service life

High measurement accuracy and high repeatability

Store and evaluate the measured values

Special calibration function for rough surfaces and calibration of unknown coating (CTC method)

Principle

Magnetic induction according to DIN EN ESO 2808, Method 7C (Type F sensor)

Eddy current (CN and N-type sensors) according to DIN EN ESO 2808, Method 7D

Probe selection

Main unit, calibrated foil and reference board, operating instructions CD-ROM, soft bag and shoulder strap, data transmission software.

[Note] Because the manufacturer's packaging may be updated or upgraded, the detailed packaging list shall be subject to the latest standard configuration of the manufacturer.