Leakage marking Tester (touch screen) pure platinum electrode purchased separately
Destructiveness test of insulating materials used to test and evaluate the relative resistance of insulators to electric fields and impurity-containing water at specified Voltages. Solid electrical insulation materials and products for electrical and electronic products, household appliances
YouKe
YK3058
-
Jinan HORIZON ZPY-01 axis deviation Tester 100-200mm
$ 1067.00 -
DUBAN DB10-4221 Acoustic calibrator Class 1
$ 374.00 -
CHENCHI MRS-01 Thin Film Heat Shrinkage Tester ≤ 140mm × 140mm
$ 1641.00 -
SuJie Y09-010 pure water smoke generator, measuring ≥ 100 clean room laminar flow
$ 1600.00 -
CHINA NBC-DB501 DuPont Impact Tester Plastic Impact Tester 0.5m
$ 666.00
Guideline
IEC60335, GB4706.1, IEC60884-1, GB2099.1, GB/T4207-2003, IEC60112.
Technical Description
This product is used in electrical products under the influence of humidity and impurity environment, which may cause insulation leakage between live parts of different polarities or between live parts and grounded metal parts. Discharge can corrode materials and even ignite causing fires. This test instrument is a destructive test for insulating materials that simulates the above situation. It is used to test and evaluate the relative tracking resistance of the insulator under the action of the electric field and impurity water under the specified Voltage. Suitable for electrical and electronic products, solid electrical insulation materials for household appliances and their products, such as: relay sockets, transfer switch covers, contactor bodies, etc.
Features
The structural parts of the test box are made of electrostatic spray paint, the drip count is accurate, and the control system is stable and reliable.
YouKe YK3058 Leakage marking Tester (touch screen) Specifications
| LIST | VALUE |
|---|---|
| In-box Volume | ≥ 0.5 cubic meters with Glass observation door |
| Electrical load | The test Voltage is adjustable between 100 and 600V, and when the short-circuit current is 1A +/- 0.1A, the Voltage drop should not exceed 10%. When the short-circuit leakage current in the test circuit is equal to or greater than 0.5A, the time is maintained for 2 seconds, and the relay operates., cut off the current, indicating that the test product is unqualified. |
| Bipolar force on the sample | The rectangular platinum plated electrode is used, and the force of the two poles on the sample is 1.0N +/- 0.05N respectively |
| Dripping device | The drop height is adjustable from 30mm to 40mm, the drop size is 44 to 50 drops/cm3, and the drop time interval is 30 +/- 1 second |
| PLC + touch screen control | It is used for manual/automatic control, parameter setting and display, and operation monitoring. It is easy to operate and easy to read real-time experimental data, and can print experimental results (optional) |
| Power | AC 220V，50Hz |
YouKe YK3058 Leakage marking Tester (touch screen) Packing list
Host X1, measurement ruler X1, power cord X1, ammonium chloride X1, distillation water X2, exhaust pipe X1, exhaust pipe buckle X1, measuringflask X1, Glass dish X1, water absorber X1
[Note] Because the manufacturer's packaging may be updated or upgraded, the detailed packaging list shall be subject to the latest standard configuration of the manufacturer.
