YOUKE YK3651A Melt Flow Indexer

Main applications and scope of application

This melt flow rate meter is used to determine the melt flow rate of various polymers in the viscous flow state, it is not only suitable for engineering plastics such as polycarbonate, polyarylsulfone, fluoroplastics with high melting temperature, but also suitable for testing materials with low melting temperature such as polyethylene, polystyrene, polypropylene, ABS resin, polyoxymethylene resin, etc., and is widely used in plastic production, plastic products, petrochemical and other industries, as well as relevant universities, scientific research units and commodity inspection departments.

This melt flow rate meter meets the test methods for the mass flow rate and melt volume flow rate of thermoplastics specified in the "GB/T 3682-2000 Determination of Melt Mass Flow Rate and Melt Volume Flow Rate of Thermoplastics", ISO 1133:2011 and ASTM D 1238-2010 standards.

Operating Principle

The melt flow rate refers to the mass of the thermoplastic passing through the standard die every 10min at a certain temperature and load, which is expressed by MFR, and the volume of the melt passing through the standard die every 10min, expressed by MVR, and its value can characterize the viscous flow characteristics of the thermoplastic in the molten state, see Part 6 and 7 of GB/T 3682-2000 Determination of Melt Mass Flow Rate and Melt Volume Flow Rate of Thermoplastics.

Instrument storage and maintenance

1. This instrument and its accessories need to be placed in a dry environment.

2. After the test, the accessories need to be wiped with anti-rust grease, and the anti-rust grease should be removed before the test.

3. After the test is completed, the power needs to be turned off to avoid accidents.

machine X1, manual X1, certificate X1, warranty card X1

[Note] Because the manufacturer's packaging may be updated or upgraded, the detailed packaging list shall be subject to the latest standard configuration of the manufacturer.