Japan OSP-07/250 formed Applicator rod WFT 7μm length 250mm
The production process is formed, the wet film thickness is 7μm, the diameter is 10mm, the Total length is 250mm, the application width is 250mm, the grip width is 0, and the material is 304 stainless steel.
Brand
SKU: NB003715
OSP
OSP-7/250
OSP-07/60
OSP-7/400
OSP-07 L2000 Φ16
Price
$ 152.00
Promotion
Service
The delivery and service By NBchao.Com
VS
What else did others buy
Genuinegoods
OSP-7/250
coating rod
The production process is formed, the wet film thickness is 7μm, the diameter is 10mm, the Total length is 250mm, the application width is 250mm, the grip width is 0, and the material is 304 stainless steel.
Japan's OSP-07/250 Extrusion Coating Stick adopts the extrusion process, and finally develops the Extrusion Coating Stick. The coating rod has the characteristics of continuous thread, easy cleaning and high cost performance.
Optional
 |
|
 |  |
Note: Click on the accessory picture to view Details.
VS
OSP OSP-7/250 coating rodSpecifications
| LIST | VALUE |
|---|---|
| Production process | Formed |
| WFT | 7μm |
| diameter | 10mm |
| Total length | 250mm |
| Application width | 250mm |
| Grip width | 0 |
| material | 304 stainless steel |
OSP OSP-7/250 coating rod Packing list
Stainless Steel Main Rod X1, Transparent External Encasement Hose X1
[Note] Because the manufacturer's packaging may be updated or upgraded, the detailed packaging list shall be subject to the latest standard configuration of the manufacturer.
FAQ
[Q]
Is this for inks?
[A]
Yes!
[Q]
OSP Mayer Rods is 250 long and the film is about 7μm?
[A]
Hello, OSP-07/250 is a film Film thickness of 7 microns, film width of 250mm, total length of 250mm, can be purchased separately matching handle use.
[Q]
Can this coating rod be prepative of multi-layer ultra-thin film?
[A]
The wire rod can be prepared for 1.5 micron ultra-thin film. Everyone must know it, but another advantage of it is multi-layer film, which is much better than I-shaped film applicator. But multi-layer film tests the flatness of the previous layers of film drying. Generally, the film thickness (such as less than 10 microns/layer) is too thin to control. The wire rod with Film Applicator is a very good solution, eliminating the problem of uneven pressure and speed of hand scraping.
[Q]
Meet GB/T26461 Applicator rod
[A]
OSP-7/250 Applicator rod, please refer to it.
[Q]
Adhesive coating, any suggestions?
[A]
The preparation of Adhesive coating is applicable to the Mayer-Rod principle, and Mayer Rods coating can be used. The thickness of the prepared Adhesive coating can be controlled by itself. In general, Adhesive can be properly diluted (such as ethyl acetate), and then coated on BOPP film or Miscellaneous substrate.
+OSP OSP-7/250 coating rod Big data
+OSP OSP-7/250 coating rodSimilar products
+OSP OSP-7/250 coating rodKnowledge
+OSP OSP-7/250 coating rodStandard
- ActiveGB/T 1727-2021
- ActiveHG/T 5370-2018
- ActiveHG/T 3951-2007
- ActiveGB/T 13217.1-2020
- AbolishGB/T 13217.1-2009
- ActiveGB/T 26461-2011
- ActiveASTM D823-2018
+Navigation