JINGKELIAN QXP 0-25μm ISO single-channe Fineness of Ground Gauge with Third Party Measurement Certificate
ISO1524 single-channe Fineness of Ground Gauge, stainless steel, scale range 0~25μm, scale unit μm, Graduation 2.5µm, with third-party Measurement certificate. Suitable for fineness determination of 5~ 15 micron slurry.
JingKeLian
QXP 0-25
QXP 0-25S
QXP 0-25
QXP 0-25S
-
QXP0-50S double-channel Fineness gauge YONGLIDA QXP Fineness gauge
$ 215.00 -
TQCsheen VF2143 single-channe Grindometer Range 0~1000μm
$ 2177.00 -
TQCsheen VF2141 single-channe Fineness gauge Range 0~5000μm
$ 2197.00 -
JINGKELIAN QXP 0-100um single-channe Fineness of Ground Gauge Fineness gauge 0~100μm
$ 148.00 -
TRUIT TR 1202/150 double-channel Fineness gauge 0~150μm
$ 187.00
The Fineness of Grind Gauge is manufactured in accordance with the relevant provisions of the international standard ISO1524-1983 (E), and is used for the determination of the particle size of paint and related products. There are two types of Fineness of Grind Gauge, single slot and double slot.
Models
| Optional models | Maximum range | Minimum scale value | Recommended range |
| single slot | 100μm | 10μm | 40~90μm |
| 50μm | 5μm | 15~40μm | |
| 25μm | 2.5μm | 5~15μm | |
| double slot | 100μm | 10μm | 40~90μm |
| 50μm | 5μm | 15~40μm |
Accuracy standard
| technical indicators | Score standard error | Groove Ratio Error | Shape accuracy | Surface roughness | |||
| Range | error | ratio | error | ||||
| scraper | single slot | 100μm | < 2.5μm | 1.0138889 | <2.5μm | front | front |
| 50μm | < 2.5μm | 1.9861111 | < 2.5μm | flatness tolerance | 0.1 | ||
| 25μm | <2μm | 3.9305556 | < 2μm | 0.012 | groove | ||
| double slot | 100μm | <2.5μm | 1.0138889 | < 2.5μm | Lateral Straightness Tolerance | 0.2Ra=1.6 | |
| 50μm | <2.5μm | 1.9861111 | < 2.5μm | 0.001 | |||
| scraper | Blade Straight Tolerance | 2um | |||||
| Surface roughness | Ra0.4 | ||||||
Precautions
1. The front of the scraper can be used as a daily inspection of the straightness of the scraper;
2. Clean the scraper after use, apply anti-rust oil and put it in the box for storage;
3. The front of the scraper and the edge of the scraper must not be bumped;
4. The Grindometer should be calibrated in our factory after one year of use.
JingKeLian QXP 0-25 ISO single-channe Fineness of Ground GaugeSpecifications
| LIST | VALUE |
|---|---|
| Scraper type | Single-channe |
| range | 0 ~ 25µm |
| Scale unit | mm |
| Graduation | 2.5µm |
| Scraper material | stainless steel |
| Scraper size | 175*65*13mm |
| Groove size | 140*12.5mm |
| Scraper size | 90*40*6mm |
| Applicable standard | ISO1524-1983(E) |
JingKeLian QXP 0-25 ISO single-channe Fineness of Ground Gauge Packing list
Scraper x1, doctor blade x2, Third Party Measurement Certificate X1
[Note] Because the manufacturer's packaging may be updated or upgraded, the detailed packaging list shall be subject to the latest standard configuration of the manufacturer.
FAQ
- IncomingGB/T 17001.3-2025
- ActiveHG/T 5173-2017
- ActiveGB/T 17473.2-2008
- ActiveGB/T 42541-2023
- ActiveGB/T 17001.6-2022
- ActiveISO 1524-2020
- ReplacedISO 1524-2000