JINGKELIAN QXP 0-50S ISO Fineness of Grind Gauge with Third Party Measurement Certificate
ISO double-channel Fineness of Grind Gauge, range 0~50 μm, scale unit μm, Graduation 5 µm, scraper material stainless steel, Applicable standard ISO1524-1983 (E).
JingKeLian
QXP 0-50S
QXP 0-50
-
Pushen QXD-25um single-channe Fineness gauge 0-25μm
$ 161.00 -
MODERNER QXD-150 single-channe Fineness gauge range 0~150 microns
Login -
TRUIT TR 1203/025 wire-channel Fineness gauge 0~25μm
$ 187.00 -
TQC VF2104 single-channe grinding Fineness of Grinding Gauge 0~15μm with calibrated certificate
$ 1044.00 -
QXP0-150S double-channel Fineness gauge YONGLIDA QXP Fineness gauge
$ 172.00
The Fineness of Grind Gauge is manufactured in accordance with the relevant provisions of the international standard ISO1524-1983 (E), and is used for the determination of the particle size of paint and related products. There are two types of Fineness of Grind Gauge, single slot and double slot.
Models
| Optional models | Maximum range | Minimum scale value | Recommended range |
| single slot | 100μm | 10μm | 40~90μm |
| 50μm | 5μm | 15~40μm | |
| 25μm | 2.5μm | 5~15μm | |
| double slot | 100μm | 10μm | 40~90μm |
| 50μm | 5μm | 15~40μm |
Accuracy standard
| technical indicators | Score standard error | Groove Ratio Error | Shape accuracy | Surface roughness | |||
| Range | error | ratio | error | ||||
| scraper | single slot | 100μm | < 2.5μm | 1.0138889 | <2.5μm | front | front |
| 50μm | < 2.5μm | 1.9861111 | < 2.5μm | flatness tolerance | 0.1 | ||
| 25μm | <2μm | 3.9305556 | < 2μm | 0.012 | groove | ||
| double slot | 100μm | <2.5μm | 1.0138889 | < 2.5μm | Lateral Straightness Tolerance | 0.2Ra=1.6 | |
| 50μm | <2.5μm | 1.9861111 | < 2.5μm | 0.001 | |||
| scraper | Blade Straight Tolerance | 2um | |||||
| Surface roughness | Ra0.4 | ||||||
Precautions
1. The front of the scraper can be used as a daily inspection of the straightness of the scraper;
2. Clean the scraper after use, apply anti-rust oil and put it in the box for storage;
3. The front of the scraper and the edge of the scraper must not be bumped;
4. The Grindometer should be calibrated in our factory after one year of use.
JingKeLian QXP 0-50S ISO double-channel Fineness of Grind GaugeSpecifications
| LIST | VALUE |
|---|---|
| Scraper type | double-channel |
| range | 0 ~ 50µm |
| Scale unit | mm |
| Graduation | 5µm |
| Scraper material | stainless steel |
| Scraper size | 175*65*13mm |
| Groove size | 140*12.5mm |
| Scraper size | 90*40*6mm |
| Applicable standard | ISO1524-1983(E) |
JingKeLian QXP 0-50S ISO double-channel Fineness of Grind Gauge Packing list
Scraper x1, doctor blade x2, Third Party Measurement Certificate X1
[Note] Because the manufacturer's packaging may be updated or upgraded, the detailed packaging list shall be subject to the latest standard configuration of the manufacturer.
FAQ
- IncomingGB/T 17001.3-2025
- ActiveHG/T 5173-2017
- ActiveWJ 2669-2005
- ActiveGB/T 42541-2023
- ActiveGB/T 17001.6-2022
- ActiveHG/T 3349-2003
- ActiveGB/T 5211.17-1988
- ActiveHG/T 4758-2014