Search
    Cart(0)
      总价
      前往结算
      您的购物车是空的 : )
      Home> Mayer Rod> RDS> RDS 47# 1/4“ Applicator rod 1/4 "

      RDS #47 Mayer Rods Applicator rod WFT 107.4μm

      Extrusion type Mayer Rods, Film thickness of 107.4 μm, for film scraping of about 100 microns, Spreader rod at both ends of the hand portion of 50mm.

      Brand
      SKU: NB000038
      United States RDS
      Stock
      Loading…
      Price
      $ 155.00
      Promotion
      Service
        Service
        The delivery and service By NBchao.Com
        VS
        Genuinegoods
        • RDS 47# 1/4“ Applicator rod 1/4 "Overview

        • Specifications
        • Comments
        • FAQs
        47# 1/4“
        Applicator rod 1/4 "
        • RDS #47 Mayer Rods Applicator rod WFT 107.4μm
        • RDS #47 Mayer Rods Applicator rod WFT 107.4μm Figure 1
        • RDS #47 Mayer Rods Applicator rod WFT 107.4μm Figure 2
        Extrusion type Mayer Rods, Film thickness of 107.4 μm, for film scraping of about 100 microns, Spreader rod at both ends of the hand portion of 50mm.

        Product description

        RDS#47 wire bar applicator is a manual coating bar for preparing 107.4μm wet film thickness, with 50mm hand-holding parts at both ends, which conforms to ergonomics and is more convenient in the coating process and convenient The operator applies pressure more evenly on the rod, and the total rod length of the RDS wire rod coater is 400mm. RDS47 wire rod applicator has only 1/4 diameter shaped coating rod, which is suitable for high-viscosity experimental coating film, easy to clean and not easy to block impurities.


        RDS coating Rods Figure 1



        RDS coating Rods Figure 2



        RDS coating Rods Figure 3



        RDS coating Rods Figure 4



        RDS coating Rods Figure 5



        RDS coating Rods Figure 6



        RDS coating Rods Figure 7



        RDS coating Rods Figure 8



        RDS coating Rods Figure 9



        RDS coating Rods Figure 10



        VS

        RDS 47# 1/4“ Applicator rod 1/4 "Specifications

        LIST VALUE
        Production process wire-wound
        WFT 107.4μm
        diameter 6.35mm
        Total length 400mm
        application width 300mm
        Grip Width 50+50mm
        material stainless steel

        RDS 47# 1/4“ Applicator rod 1/4 " Packing list

        Stainless Steel Rod X1 Transparent Encasement Hose X1

        [Note] Because the manufacturer's packaging may be updated or upgraded, the detailed packaging list shall be subject to the latest standard configuration of the manufacturer.

        FAQ

        [Q]
        Can this thing measure Coating mass?
        [A]
        It should be said that it is Coating quality. Mass needs to be measured with Balance in the field of detection.
        [Q]
        Do you support customization? Such as wet film thickness and length?
        [A]
        Spreader rod length and main rod diameter support customization, but wet film thickness RDS has provided dozens of specifications covering more than 200 microns, and in principle does not accept customization.
        [Q]
        Is this the extruded wire rod mentioned in JB/T7663.2?
        [A]
        OK
        [Q]
        Spreader and swirl/spin film, pull film what is the difference? Which is good?
        [A]
        Swirl/spin film coating can not cover the surface of the substrate Glass, Coating is thrown out of the filamentous film and uneven; pull film uniformity is good, Glass substrate on both sides, transparency is general, film thickness is not easy to control; Spreader Glass surface uniformly covered, good transparency, Coating less, and can control the film thickness well.
        RDS
        RDS #47 Mayer Rods Applicator rod WFT 107.4μm
        Service
        Focus on online sales of Lab Testing Instruments