XIONGFA XF-MD03 Electronic Liquid Density Meter

Introduction

U-tube oscillation densitizer and electronic liquid density meter are based on the principle of different oscillation frequencies when the double U-tube is filled with different media. After the liquid to be measured is pumped into the resonator tube sensor, the measurement data is processed by a single-chip microcomputer, which is fast and direct, and has high sensitivity. It is composed of a double tuning fork density sensor, a vibrating cylinder circuit, a temperature measurement circuit, a CPU, a display, a thermostatic bath, a liquid inlet pump and a control panel.

Applications: Petroleum, Diesel, Detergent, Lubricating Fluid, Chemical Liquid, Flux, Crude Oil, Chemical Reagent, Ben, Toluene, Flavors and Fragrances, Essential Oils,Density tests for alcohol, beverages and other industries, for alcohol and sulfuric acid solutions, can be converted to concentration!

Standards for electronic liquid density meters: GB/T29617, ISO12185, ASTMD4052/D5002, GB/T29617-2013, GB/T2013-2010, GB23971-2009, GB4747-2009, SH/T0604-2000, SN/T2383-2009, SH/T0729-2004, ASTMD4052, ASTMD5002, ASTMD1250,ASTMD3505,ISO12185:1996

peculiarity

1. The principle of U-tube vibration method is adopted, which is suitable for automatic measurement of liquid density

2. Imported high-progress XFMD chip processing, high sensitivity and accurate data

3. Automatic sampling: Xiongfa special automatic sampling system, automatic quantitative technology, high precision

4. Adopt self-developed residue removal technology to ensure that the sample has no residue

5. Constant temperature control: the self-developed Peltier refrigeration technology is adopted, which has high refrigeration efficiency and environmental protection

6. Wall-free treatment: The liquid will leave residual liquid on the inner wall of the oscillating tube in the process of flowing, which will affect the measurement accuracy, so the residual liquid on the inner wall of the oscillating tube can be avoided by doing wall-free treatment on the inner wall of the oscillating tube, which ensures the accuracy of the instrument. 7. Data storage and transmission: built-in storage chip, which can store 80 sets of detection data, and can be called back and deleted 8. Calibration function: use 20°C pure water as the standard to calibrate the instrument, which is a function that cannot be achieved by glass density meter.

Test Steps

Insert the injection tube into the liquid, press the "sampling" button, the liquid will be automatically pumped into the vibrating cylinder, and when the temperature of the machine is constant to 20±0.1°C, the screen will directly display the temperature and density value of the liquid.

Automatic cleaning

Drain the liquid in the vibrator first, and then clean the vibrator with a suitable cleaning solution until no residue is visible in the vibrator.

Host x1, manual x1

[Note] Because the manufacturer's packaging may be updated or upgraded, the detailed packaging list shall be subject to the latest standard configuration of the manufacturer.