JINGRUI SX2-5-12TP ceramic fiber furnace Resistance Furnace 1200 ℃ 13L volume

Introduction

SX2-5-12TP ceramic fiber furnace Resistance Furnace is a research type 1200TP series box-type Resistance Furnace produced by elite, the furnace is double-layer chassis type, imported high-purity alumina fiber material, imported furnace wire to ensure the furnace temperature reliable and long life.SX2-5-12TP Resistance Furnace has a temperature control accuracy of ±1°C, and adopts PLC+6 inch color touch screen, which controls the temperature rise or single-point heating mode through 60 stages of program, and controls the temperature rise very freely. Temperature sensor with stainless steel armored thermocouples. The elite Resistance Furnace is equipped with an exhaust port in the circuit, which is conducive to timely exhaust or flue gas circulation during the use of the Resistance Furnace.

Scope of application

eliteSX2-5-TP Resistance Furnace can be widely used in laboratories, scientific research institutes, colleges and universities, industrial and mining enterprises and other experiments. Suitable for material sintering,heat treatmentMelting, volatile matter, etc.

Features and advantages

1）SX2-5-12TP ceramic fiber furnace Resistance Furnace design temperature is 1200°C, ceramic fiber board can save 60% energy compared with traditional materials, and the working temperature is ≤1100°C.

2) The control system of the elite muffle furnace is composed of 6-inch color LCD touch screen + PLC system.

3) The muffle furnace is equipped with an exhaust port in the circuit, which is conducive to the atmosphere, flue gas circulation and discharge of the sintering process, and ensures a better Operating Environment.

4）eliteThe SX2-5-12TP Resistance Furnace is made of high-purity alumina fiber material.

5) According to the international professional design concept, the chassis of the Resistance Furnace is designed with a double-layer furnace structure with hollow heat insulation and strong ventilation, which can ensure that the surface temperature of the furnace body is far lower than the national standard.

6) There are 10 sets of heating formulas that can be edited by users inside the Resistance Furnace, which can be convenient for users.

Design for safety features

1、The SX2-5-12TP Resistance Furnace has a door opening breakpoint protection system.

2. The overheating protection system on the surface of the galvanometer furnace body ensures the safe operation of the muffle furnace.

3. It has an anti-dumping device.

4. The furnace door and flow are made of good 304 stainless steel material, which has antioxidation ability and rust resistance.

5. EliteSX2-5-12TP Resistance FurnaceIt has the function of continuing to heat the Resistance Furnace after the power failure of the power supply line is restored.

Actual picture of the product

The overall display of elite SX2-2.5/5-12TP Resistance Furnace

Detail of the operation panel of the elite SX2-2.5/5-12TP Resistance Furnace

Resistance furnace x1, manual x1, certificate x1, Encasement box x1

[Note] Because the manufacturer's packaging may be updated or upgraded, the detailed packaging list shall be subject to the latest standard configuration of the manufacturer.