LEICI DDS-307A Conductivity Meter conductivity TDS Temperature Class 1.0
Level 1.0, 0.00μS/cm~ 200mS/cm, +/- 1.0% FS, TDS range 0.00mg/L~ 100g/L, high definition liquid crystal display, button operation, standard composite Conductivity Detector electrode, electrode holder, dust cover
LeiCi
DDS-307A
DDS-307
-
BANTE S50-M S50 Wireless Bluetooth Conductivity Meter conductivity TDS salinity Conductivity Detector Ash meter
$ 221.00 -
Bante510-DL Laboratory conductivity /TDS meter
$ 402.00 -
BANTE A151-DH Laboratory conductivity /TDS/salinity/resistivity meter
$ 535.00 -
Bante950-DL Laboratory conductivity /TDS/salinity/resistivity meter
$ 526.00 -
Conductivity Detector electrode
$ 102.00
Features
● High-definition LCD display, button operation
● Support functions such as automatic shutdown, power-off protection and factory reset
● Support IP54 protection level
● Composite conductivity electrode, electrode bracket and dust cover are standard
Intelligent detection and automatic identification
● Intelligent endpoint discrimination, support balance measurement mode and continuous measurement mode
● Support automatic/manual temperature compensation
● Automatically identify 4 kinds of GB conductivity standard solutions, and support 1-point conductivity electrode calibration
● It supports automatic frequency switching, and the 1.0 constant electrode can cover the full range measurement
Data management, information traceability
● Support data storage (50 sets), viewing, and deletion
LeiCi DDS-307A Conductivity MeterSpecifications
| LIST | VALUE |
|---|---|
| Conductivity level | Level 1.0 |
| Conductivity range | 0.00μ S/cm~200ｍS/cm |
| TDS range | 0.00mg/L~100g/L |
| TDS resolution | 0.01Mg/L, automatically switched according to the range |
| Measurement range | -5.0~110.0℃ |
| Display resolution | 0.1℃ |
| Temperature electronic unit error of indication | ±0.2 ℃ |
| Power Supply | Power adapter (input: AC100~240V, output: DC9V) |
| size | 242*195*68mm |
| Weight | 0.9kg |
LeiCi DDS-307A Conductivity Meter Packing list
Host x1, DJS-1C Conductivity detector electrode (platinum black) x1, T-818-B-6 temperature electrode x1, REX-3 multifunctional electrode holder x1, universal power cord x1, fuse tube BGXP 0.5A φ 5 × 20x2, dust cover (middle) x1, manual x1, certificate x1
[Note] Because the manufacturer's packaging may be updated or upgraded, the detailed packaging list shall be subject to the latest standard configuration of the manufacturer.
FAQ
- Operation and application instructions for conductivity meters
- Conductivity Detector and non-volatile content of electro-coatings
- Introduction to the working principle of ConductivityMeter
- Introduction of the new ConductivityMeter
- Conductivity meter operation instructions
- How is Conductivity Detector measured?
- Detection principle and application of conductivity meter
- How to use the new pH meter and conductivity meter?
- Conductivity Detector method and precautions
- Conductivity meter standard test box calibrating method
- ActiveJJG 2059-2014
- ActiveJB/T 9366-2017
- ActiveSL 78-1994
- ActiveGB/T 12582-1990
- ActiveGB/T 13580.3-1992
- ActiveGB/T 6539-1997
- ActiveGB/T 18932.15-2003
- ActiveGB/T 11007-2008
- ActiveGB/T 23977-2009
- ActiveGB/T 41079.2-2022
- ActiveGB/T 6908-2018
- ActiveGB/T 7977-2007
- ActiveGB/T 32697-2016
- ActiveGB/T 33328-2016
- ActiveISO 21318-2007
- ActiveISO 9944-1990
- ActiveGB/T 27503-2011
- ActiveGB/T 27502-2011
- ActiveHG/T 3802-2005