BENTING CBWS-150B Constant Temperature and Humidity Incubator Volume 150L
150L volume, independent humidification, temperature distribution accuracy +/- 1 ℃, 30-stage program control, turbine centrifugal forced air supply temperature is uniform.
BenTing
CBWS-150B
-
Kenton SPX-100SMJ bacterial microbial incubator 100L
$ 893.00 -
YIHENG MGC-800BP-2L LED light source lighting chamber 800L/3700W
$ 7391.00 -
BOZHEN KRG-300A lighting chamber 300L/both sides lighting
$ 2622.00 -
HUITAI BPH-9082 Precision thermostatic incubator Nominal capacity 80L Power 350W
$ 599.00 -
BOZHEN LRH-250 Biochemical Incubator Volume 250L
$ 933.00
Overview
Operating temperature range Without humidification: 0 ~ 65°C With humidification: 10 ~ 65°C Temperature distribution accuracy ± 1°C Humidity control range 45% ~ 90%RH Constant temperature experiment and environmental test
Features
● Independent humidification to achieve humidity control.
● LCD 30-segment program control, repeated step and step operation.
● Convenient operation, fixed value operation, timing operation, automatic stop.
● Special function keys for temperature setting.
● Auxiliary menu to realize overheating alarm, deviation correction and menu lock.
● Turbine centrifugal forced air supply, more uniform temperature.
● Power-off protection, parameter memory, call recovery.
● Compressor overload protection.
Functional type (BX series)
● Start and stop, power failure protection, call recovery.
● Circuit self-diagnosis, sensor failure alarm, upper and lower limit over-temperature alarm.
● Intelligent defrosting.
● Monitor timing.
● Overheating preventer
safety
● Overheating alarm, menu lock, overheating prevention, overload protection, power-off protection
BenTing CBWS-150B Constant Temperature and Humidity IncubatorSpecifications
| LIST | VALUE |
|---|---|
| Air supply method | forced convection |
| Temperature range | No humidification: 0~65 ℃; with humidification: 10~65 ℃ |
| Temperature Resolution | 0.1℃ |
| Temperature Fluctuation | High temperature +/- 0.5 ℃; Low temperature: +/- 1 ℃ |
| Temperature Uniformity | ±1℃ |
| Humidity Control Range | 45%~90%RH |
| Humidity stability | ±5% |
| Liner material | stainless steel plate |
| Enclosure Material | Cold rolled steel plate, surface resistant painting |
| heat insulation material | polyurethane |
| Heating device | Stainless steel heating pipe |
| Rated power | 1.0kw |
| compressor | Air-cooled closed compressor |
| refrigerant | R134A |
| Defrost structure | Type B: manual; Type BX: automatic |
| Humidity control mode | automatic |
| Lead Hole | Inner diameter 52mm each |
| Controlled external Power Supply | 1 external |
| Temperature Control mode | 30-Segment LCD program |
| Temperature setting method | Tap the button to set |
| Temperature representation | Measuring temperature display: liquid crystal upper display; setting temperature display: liquid crystal lower display |
| Timer Range | 0~99.9h × 30 (with Timer and waiting function) |
| Operational Features | Fixed value, operation, scheduled operation, automatic stop/appointment start, program operation |
| programmable function | Standard |
| Sensors | Pt100 |
| Additional features | Deviation correction, menu button lock, power outage compensation, power outage, memory |
| Safety Devices | Overrise alarm, overload protection |
| Liner size | 500*400*750mm |
| Dimension | 640*620*1270mm |
| packing size | 820*760*1430mm |
| Volume | 150L |
| Shelf load bearing | 15kg |
| Shelf (max.) | The ninth floor. |
| Shelf spacing | 60mm |
| Power supply Voltage | AC 220V/3.6A（50/60Hz） |
| Net Weight | 86kg |
| Shelf (standard) | 2pcs |
| Shelf | 4 pieces |
| Optional Accessories | Shelf, RS485 interface, printer, recorder, external communication, remote control, programmed temperature control, wireless SMS alarm, U disk data storage |
| Gross Weight | 114kg |
BenTing CBWS-150B Constant Temperature and Humidity Incubator Packing list
complete-built unit X1, manual X1, certificate of conformity X1, warranty card X1
[Note] Because the manufacturer's packaging may be updated or upgraded, the detailed packaging list shall be subject to the latest standard configuration of the manufacturer.