RDS 48 #3/8 "Mayer Rods WFT 109.7μm Length 400mm

Apply photosensitive glue, the viscosity reaches 3000cps, can I use Mayer Rods?

Hello, not suitable, the viscosity is too high. Use Film Applicator.

Do you support customization? Such as wet film thickness and length?

Spreader rod length and main rod diameter support customization, but wet film thickness RDS has provided dozens of specifications covering more than 200 microns, and in principle does not accept customization.

Applicator rods meet the specifications of GB/T13217.1?

Model 48 #3/8 "Applicator rod

Spreader and swirl/spin film, pull film what is the difference? Which is good?

Swirl/spin film coating can not cover the surface of the substrate Glass, Coating is thrown out of the filamentous film and uneven; pull film uniformity is good, Glass substrate on both sides, transparency is general, film thickness is not easy to control; Spreader Glass surface uniformly covered, good transparency, Coating less, and can control the film thickness well.

What is the Spreader accuracy of RDS Metering rod? Will there be errors?

The accuracy of RDS reaches 0.1 micron, which is the Metering rod with the highest accuracy known so far. The Metering rod used in the laboratory will have certain possible errors due to hand scraping, different manpower, testing baseplate and other reasons. Thank you for your consultation!