LEICI DDSJ-318T Conductivity Meter conductivity Electrical resistivity TDS salinity value, ash, temperature value 0.5 level

main feature

● Adopt high-definition color LCD touch screen with clear display

● Support Chinese and English

● Temperature units optional: ℃ and °F

● Reference temperature 5.0℃, 10.0℃, 15.0℃, 18.0℃, 20.0℃ and 25.0℃ are optional, the default is 25℃

●Support functions such as automatic shutdown, power-off protection and factory reset

● Support firmware upgrade function, allowing function expansion and personalized requirements

●Support IP54 protection level

● Comes standard with composite conductivity electrode, independent electrode holder, dust cover and bagged calibration solution

Intelligent operation, automatic identification, batch detection

● Intelligent operating system with functions such as method management, electrode management, data management and user management

● Support instrument self-test and user hierarchical authority management, support password management

● Intelligent identification of end points, supporting automatic reading, scheduled reading, scheduled interval reading, and manual reading

● Automatically identify GB and international standard conductivity solutions, and support 1-5 point conductivity electrode calibration

●Supports calibration reminder and forced calibration functions, supports conductivity standard solution verification and mandatory verification functions

●Support measurement alarm limit setting

● Within the range, it has functions such as automatic temperature compensation and automatic range switching.

●Supports multiple conductivity compensation modes such as non-compensation, linear, non-linear, pure water compensation, etc.

● Supports multiple salinity compensation modes such as seawater salinity and default salinity.

● Supports automatic frequency switching, and is equipped with a 1.0 constant electrode that can cover the full range of measurements (it is recommended to use a 0.1 constant or 0.01 constant conductivity electrode for measurement of samples below 20 μS/cm)

● Supports connection to an automatic sampler to achieve automatic measurement and batch detection of samples

Data management, information traceability,

● Comply with GLP specifications, support 1000 sets of data storage, review, deletion, statistics, analysis, transmission and printing

● Support GMP management, support GMP operation log review, and achieve complete traceability and tracking of data.

● Equipped with RS-232 interface, supports connection to standard RS-232 serial port printer, and directly prints measurement results. The printing format is optional.

● With USB interface, it can be connected to PC through special communication software to realize data transmission.

● Support U disk reading and writing, support connecting to scanner gun

Host X1, DJS-1VTC Conductivity detector electrode X1, conductivity solution 1408μs/cm (1 * 10) X1, REX-6 multifunctional electrode holder X1, manual X1, certificate X1, warranty card X1

[Note] Because the manufacturer's packaging may be updated or upgraded, the detailed packaging list shall be subject to the latest standard configuration of the manufacturer.