Digital Tensilometer HF-10 Hypertherm Upgraded Digital Tensilometer

Introduction

Hypertherm Instruments HF-10 digital display force gauge is the HF series of Hypertherm push and pull force gauges. The HF series digital display force gauge is an upgraded model of the HG series. Based on the HG series, it achieves greater data storage capacity of 200 groups, and With key action force and rebound force testing and first peak hold function, it has more powerful functions.

HF-2/5/10/20/50 digital display force gauge is a push-pull force gauge with built-in sensor. The corresponding measured load values ​​are 2N, 5N, 10N, 20N, and 50N. This tension gauge is small in size and easy to carry. .

Features

1. HF-10 digital display tensile gauge has a unique first peak hold function during the test process.

2. It has excellent button action force and rebound force testing.

3. Neutral acceleration value can be set.

4. The accuracy and resolution are very high, and the sampling speed can be as high as 960HZ.

5. Freely set the upper and lower deviation values, automatic sound alarm and level signal output.

6. Display the test direction (pull force +, push force -).

7. HF-10 digital display tensile gauge adopts dot matrix LCD display with green backlight screen.

8. The operation interface can be displayed in Chinese or English, and the displayed test content can be flipped 180 degrees to facilitate multi-angle measurement.

9. It has large storage function, can store 200 sets of test data, and automatically calculates the average, minimum and maximum values ​​of the stored data.

10. Automatically shut down if no operation is performed (freely set time from 0 to 99 minutes).

11. Peak hold and peak release functions (can be set from 0 to 99 seconds).

12. Serial communication, the computer displays force value curves, force value tables and other display methods, and processes the data, such as statistical analysis, etc.

13. Serial port output can print the stored test data and the maximum value, average value and minimum value.

Applications

The HF-10 digital display force gauge is suitable for push-pull failure tests, push-pull load tests, plug-in and pull-out force tests, etc. It can be combined with the machine and fixtures to form a small experimental machine.

Product Structure

The structure of the HF-10 digital display tensile gauge includes: contact connecting rod, display window, buttons, lower limit indicator light, upper limit indicator light, power adapter jack, communication interface, and level signal output interface. See below

Product actual pictures

Certificate

Force Gauge x1, Certificate of Conformity x1, Warranty Card x1, Manual x1, Instrument Case x1

[Note] Because the manufacturer's packaging may be updated or upgraded, the detailed packaging list shall be subject to the latest standard configuration of the manufacturer.