Yoke P906 Conductivity Detector, dissolved oxygen two-parameter desktop Tester

Introduction

It is used for high-precision measurement of conductivity and dissolved oxygen in the laboratory. It is suitable for industries such as biotechnology, aquaculture, power plants and environmental protection.

Features

1. It adopts 6.5-inch LED screen with complete and intuitive parameter display and user-friendly interface design, which is convenient for users to operate and use.

2. Omron long-life light-touch button is adopted, which is convenient and durable, and can reach more than 100,000 times.

3. Meet the GLP requirements of international standards, with intelligent functions such as automatic calibration, automatic temperature compensation, data storage, USB output, clock display, wireless printing, function setting and self-diagnosis information.

4. The instrument has a built-in English operating system, humanized operation design, and the brightness of the instrument is adjustable

5. The built-in large-capacity storage can store 2000 sets of measurement data. The data can be stored and transferred through the U disk. The stored data can be opened by the general office software EXELL, which is very convenient for customers to edit.

6. The dissolved oxygen measurement mode has the functions of automatic temperature compensation, automatic salinity compensation and automatic air pressure compensation.

7. The polarographic dissolved oxygen electrode with a new structure can measure temperature, salinity and dissolved oxygen at the same time. Equipped with a special dissolved oxygen electrode calibration sleeve, the electrode polarization only needs 3~5 minutes.

8. Using the combined diaphragm cap, when replacing the sensitive membrane, just screw the new diaphragm cap on the electrode, which is very convenient to use.

9. Automatically identify 8 kinds of conductivity standard solutions, and there are two series of standard solutions to choose from: European and American series and Chinese series.

10. Using excellent conductivity measurement technology, using a conductivity electrode with a constant K=1 requires only one point of calibration to meet the measurement accuracy requirements of 0.5μS/cm ~ 200 mS/cm.

11. Switchable conductivity, TDS, salinity and resistivity. TDS and salinity are calculated using polynomials to ensure the conversion accuracy of the full range.

12. The instrument can be equipped with a Bluetooth module, which supports wireless Bluetooth printing, which is convenient for users to operate.

13. Comply with IP54 dust-proof and splash-proof design.

complete-built unit X1, manual X1, certificate of conformity X1, warranty card X1

[Note] Because the manufacturer's packaging may be updated or upgraded, the detailed packaging list shall be subject to the latest standard configuration of the manufacturer.