RDS 80G #3/8 "Gap Applicator rod film thickness 182.9μm

Wet film thickness 182.9μm, film width 30cm, diameter 9.52mm, can reduce clogging and eliminate scratches, suitable for high viscosity film.

Brand

SKU: NB039472

RDS

Model

80G# 3/8"

Price

$ 172.00

Promotion

Service

The delivery and service By NBchao.Com

Get Quote

RDS shopSE

Information

Datasheet RFQ Contract Video Catalog Manual

What else did others buy

LABOratory film rod 50 210mm film width film Applicator

$ 95.00
US RDS 2 #3/8 "Mayer Rods 4.6μm molding coating bar

$ 161.00
Japan OSP-100/60 Applicator rod WFT 100μm length 60mm

$ 115.00
RDS 14 #1/4 "Coating rod film thickness 32.0 μm rod diameter 6.35mm

$ 155.00
RDS 5 #3/8 "Applicator rod 11.4 μm Spreader

$ 161.00

Genuinegoods

RDS 80G# 3/8" Applicator rod 3/8 "Overview
Specifications
Comments
FAQs

80G# 3/8"

Applicator rod 3/8 "

Wet film thickness 182.9μm, film width 30cm, diameter 9.52mm, can reduce clogging and eliminate scratches, suitable for high viscosity film.

Preparation principle

Following the Mayer Rod film coating principle, for higher viscosity fluids, the gap film coating rod reduces clogging and eliminates scratches. By winding smaller wires at pitches (see photo), the cavity created is wide and shallow, allowing thick coatings to flow better. Smaller wires create smaller interruptions in the coating flow, allowing for more complete wetting of the coating.

RDS 80G# 3/8" Gap Coating Rod 3/8" Details Figure 1

RDS Interstitial Coating Rod Big Rod Model List

Bar number	Steel Wire diameter (mm)	Coating thickness (μm)
RDS 80#	2.032	182.88
RDS 85 #	2.159	194.31
RDS 90 #	2.286	205.74
RDS 95 #	2.413	217.17
RDS 100 #	2.54	228.6
RDS 105 #	2.667	240.03
RDS 110 #	2.794	251.46
RDS 115 #	2.921	262.89
RDS 120 #	3.048	274.32
RDS 125 #	3.175	285.75
RDS 130 #	3.302	297.18
RDS 135 #	3.429	308.61
RDS 140 #	3.556	320.04
RDS 145 #	3.683	331.47
RDS 150 #	3.81	342.9
RDS 155 #	3.937	354.33
RDS 160 #	4.064	365.76
RDS 165 #	4.191	377.19
RDS 175 #	4.445	400.05
RDS 185 #	4.699	422.91
RDS 200 #	5.08	457.2
RDS 225 #	5.715	514.35
RDS 250 #	6.35	571.5

RDS 80G# 3/8" Applicator rod 3/8 "Specifications

LIST	VALUE
Production process	Interstitial wire-wound
WFT	182.9µm
diameter	9.52mm
Total length	400mm
Application width	300mm
material	stainless steel

RDS 80G# 3/8" Applicator rod 3/8 " Packing list

Stainless Steel Rod X1 Transparent Encasement Hose X1

[Note] Because the manufacturer's packaging may be updated or upgraded, the detailed packaging list shall be subject to the latest standard configuration of the manufacturer.

FAQ

[Q]

What is the difference between a gap Applicator rod and a wire-wound Applicator rod?

[A]

Applicator rods are mainly for high viscosity fluids. The standard wire-wound drawdown bar is suitable for wet-films below 1000cps, while the gap Applicator rod is suitable for fluids with high viscosity from 1000 to 3000cps

[Q]

Can this gap bar scrape high viscosity fluid samples?

[A]

Yes, unlike standard Myaer rods, gap rods are suitable for scraping fluids in the viscosity range of 1000 to 3000cps, but not beyond 3000cps. These numbers are not absolute, and Miscellaneous factors must also be considered.

[Q]

Does this wire-wound gap open bar support customization?

[A]

Yes, the standard length is 40cm. If you need to customize Miscellaneous specifications, please contact customer service.

+RDS 80G# 3/8" Applicator rod 3/8 " Big data

+RDS 80G# 3/8" Applicator rod 3/8 "Knowledge

+Navigation

RDS 80G #3/8 "Gap Applicator rod film thickness 182.9μm

RDS 80G# 3/8" Applicator rod 3/8 "Overview

Preparation principle

RDS Interstitial Coating Rod Big Rod Model List

RDS 80G# 3/8" Applicator rod 3/8 "Specifications

RDS 80G# 3/8" Applicator rod 3/8 " Packing list

FAQ