RDS 120G #3/8 "Gap Applicator rod prepative film thickness 274.3μm
Production process gap wire-wound, wet film thickness 274.3μm, diameter 9.52mm, Total length 400mm, Spreader width 300mm, material stainless steel.
RDS
120G# 3/8"
-
RDS 14 #3/8 "Mayer Rods WFT 32.0μm Length 400mm
$ 161.00 -
Water-based glue Film Applicator No. 70 Paint experiment stick type wet film Applicator 240mm long
$ 95.00 -
Japan OSP-03/250 Stainless Steel Spreader coating bar WFT 3μm length 250mm
$ 152.00 -
RK K303.10.5 coater rod K303 coater special film thickness 50μm
$ 192.00 -
Japan OSP-60/250 paint scraper stick WFT 60μm length 250mm
$ 152.00
Preparation principle
Following the Mayer Rod film coating principle, for higher viscosity fluids, the gap film coating rod reduces clogging and eliminates scratches. By winding smaller wires at pitches (see photo), the cavity created is wide and shallow, allowing thick coatings to flow better. Smaller wires create smaller interruptions in the coating flow, allowing for more complete wetting of the coating.
RDS 120G# 3/8" Applicator rod 3/8 "Specifications
| LIST | VALUE |
|---|---|
| Production process | Interstitial wire-wound |
| WFT | 274.3µm |
| diameter | 9.52mm |
| Total length | 400mm |
| Application width | 300mm |
| material | stainless steel |
RDS 120G# 3/8" Applicator rod 3/8 " Packing list
Stainless Steel Rod X1 Transparent Encasement Hose X1
[Note] Because the manufacturer's packaging may be updated or upgraded, the detailed packaging list shall be subject to the latest standard configuration of the manufacturer.
FAQ
- Bar Spreader Technology: Principles, Applications and Advantages over Miscellaneous coating methods
- The overlooked role of Mayer Rods in laboratory wet-film preparation