RDS 150G #3/8 "interstitial wire-wound drawdown Bar Moulding Film thickness 342.9μm
Interstitial wire-wound, Film thickness 342.9μm, diameter 9.52mm, suitable for high viscosity fluid scraping.
RDS
150G# 3/8"
-
RDS 4 #1/4 "coating bar film thickness 9.1μm rod diameter 6.35mm
$ 156.00 -
ASP CHINA Experimental coating rod Mayer Rods 250μm formed wire-wound drawdown Bar
$ 134.00 -
RDS 5 #1/4 "wire-wound Applicator rod film thickness 11.4μm Wire diameter 0.13mm
$ 156.00 -
Japan OSP OSP-96/250 Applicator rod WFT 96μm length 250mm
$ 153.00 -
RK K202.10.1 No. 1 wire rod K202 Coater special WFT 6μm
$ 178.00
Preparation principle
Following the Mayer Rod film coating principle, for higher viscosity fluids, the gap film coating rod reduces clogging and eliminates scratches. By winding smaller wires at pitches (see photo), the cavity created is wide and shallow, allowing thick coatings to flow better. Smaller wires create smaller interruptions in the coating flow, allowing for more complete wetting of the coating.
RDS 150G# 3/8" Applicator rod 3/8 "Specifications
| LIST | VALUE |
|---|---|
| Production process | Interstitial wire-wound |
| WFT | 342.9µm |
| diameter | 9.52mm |
| Total length | 400mm |
| Application width | 300mm |
| material | stainless steel |
RDS 150G# 3/8" Applicator rod 3/8 " Packing list
Stainless Steel Rod X1 Transparent Encasement Hose X1
[Note] Because the manufacturer's packaging may be updated or upgraded, the detailed packaging list shall be subject to the latest standard configuration of the manufacturer.
FAQ
- Bar Spreader Technology: Principles, Applications and Advantages over Miscellaneous coating methods
- The overlooked role of Mayer Rods in laboratory wet-film preparation