American Aisha A. shine No. 24 Dyne pen Corona pen

Specification

18, 19, 20, 21, 22, 23, 24, 25, 26, 27, 28, 29, 30, 31, 32, 33, 34, 35, 36, 37, 38, 39, 40, 41, 42, 43, 44, 45, 46, 47, 48, 49, 50, 51, 52, 53, 54, 55, 56, 57, 58, 59, 60, 61, 62, 63, 64, 65, 66, 67, 68, 69, 70, 72

features

• Built-in 15ml test solution, which can be used more than 100 times

• 6-8 months shelf life

• The tip of the pen is carefully designed to reduce the chance of contact between dyne liquid and air

• Each pen has been inspected many times, quality assurance

• Strictly comply with ASTM Standard D2578 standard and TAPPI T698 standard 

use

It can accurately test whether the surface tension of the plastic film reaches the value of the test pen. Let users know clearly whether the film is suitable for printing, lamination or vacuum aluminum plating, etc., so as to effectively control the quality and reduce the loss caused by unqualified materials. It is not limited to plastic films, but can also test the surface tension of various materials.

Applicable material

• Plastic films: PS, PE, PP, PET, PI, PC, NY, CPP, OPP, PVC,

• Conductive materials: aluminum foil, copper foil, carbon foil, evaporated film.

• Other materials: glass, ceramics, plastic sheets, plastic pipes, etc.

Instructions

1. Choose a corona pen with a suitable dyne value

2. Clean the surface of the film and lay it flat on a horizontal table

3. Gently draw a stroke on the film surface with a corona pen

4. If the fluid does not shrink within three seconds, the selected dyne is reached, otherwise not.

Dyne pen X1

[Note] Because the manufacturer's packaging may be updated or upgraded, the detailed packaging list shall be subject to the latest standard configuration of the manufacturer.