CHINA ASR-ST10 Heat seal Tester

Introduction

It is suitable for the determination of parameters such as heat sealing temperature, heat sealing time and heat sealing pressure of test materials. It is a laboratory instrument for the packaging of food enterprises, pharmaceutical enterprises, daily chemical product enterprises and raw material production enterprises.

product application

Film plastic, composite film paper base, composite film, aluminized film, co-extruded film

Features

• Digital P, l, D temperature control system, high temperature control accuracy

• Microcomputer control, large-screen LCD display (optional)

• Down-mounted dual-cylinder synchronous circuit to ensure pressure balance

• Aluminum potting type heat sealing head ensures the uniformity of heating of the heat cover

• Independent temperature control of the upper and lower heat sealing heads, super long heat sealing design, to meet the needs of different customers

• Manual and foot switch dual mode, humanized structure design

• Anti-scald design and leakage protection design, safer operation

• Micro printer, which is convenient for users to print test results (touch screen only)

Test Principle

The heat-Sealing Tester adopts the heat-press sealing method, places the sample to be sealed between the upper and lower heat-sealing heads, and completes the sealing of the sample under the preset temperature, pressure, and time. Provide guidance for users to find heat sealing parameters through trial and error. To ensure fast and precise pressure setting, the heat-sealing jaws gently move against and seal adjacent samples, resulting in reproducible short sealing times. The setting of heat sealing time can be set arbitrarily. Press the foot switch, the sample is pressed, and the heat sealing time is determined by the pressing time of the foot switch, loosen the foot switch, the upper and lower heat sealing knives are separated from the pressing state, and the heat sealing of the sample is completed.

Executive standard

QB/T 2358 (ZBY 28004), ASTM F2029, YBB 00122003

complete-built unit X1, manual X1, certificate of conformity X1, warranty card X1

[Note] Because the manufacturer's packaging may be updated or upgraded, the detailed packaging list shall be subject to the latest standard configuration of the manufacturer.