Europe imported TQC VF2030 Ford Viscosity Cup ford cup, aperture 2.53mm with VF2061 bracket

Introduction to Viscosity Cups

The TQC Ford Cup is the most widely used measurement tool in the field of viscosity testing coatings for rapid viscosity testing of fluids that conform to or close to Newtonian mechanical properties, and the outFlow Cup method is also recognized worldwide as a fast and effective method for measuring viscosity.

Today's paint Ford cups are produced according to a number of international standards that have been around for many years and specify not only the precise dimensional tolerances required in the process, but also their use and the data records obtained.

Each TQC brand paint Ford cup is produced under an ongoing quality control program and is engraved with a unique serial number. Most Ford cups are made of aluminum-titanium alloy and stainless steel. All filters embedded in the bottom of the Ford cup are made of stainless steel.

FORD Viscosity Cups are used to test the concentration of paints, paints and other similar products. The viscosity of the liquid is calculated and classified by the process of the liquid flowing out of the hole under the Ford cup.

Ford Cup series parameters

Introduction to the stent

The tripod of the TQC VF2061 viscometer holder has a built-in level, and the balance can be adjusted freely through the level, and the size can be adjusted by using a telescopic stand. The VF2061 viscometer holder is made of stainless steel and the bottom foot ring is made of polyvinyl chloride.

The VF2061 viscometer fits all DIN, ISO and ASTM viscometers.

Viscosity cup features

1. Paint Ford Viscosity Cup design, there is a deep groove on the cup mouth to prevent the measured liquid from overflowing

2. All kinds of special paint Ford cup holders

3. TQC coating Ford Cup is made through strict quality monitoring procedures

4. Each cup is engraved with a unique number code

5. Each paint Ford cup is packed in a thick plastic box with a soft material stuffed inside to protect the cup.

Actual picture of the product

Viscosity cup x1, bracket X1

[Note] Because the manufacturer's packaging may be updated or upgraded, the detailed packaging list shall be subject to the latest standard configuration of the manufacturer.